Using the Metric washer generator
Create a simple washer using the metric proportions supplied by threads-scad. This generator has one size control: the nominal screw diameter. The library derives the washer geometry, making it useful when you want a quick printable spacing or light-duty assembly part.
- Choose the nominal metric screw size for the washer.
- Read the generated outside dimensions instead of treating the selected size as the washer's outside diameter.
- Export the STL and check the hole, thickness and contact area in your slicer and a printed sample.
One size control, library-defined proportions
Selecting 8 mm means a washer intended around that nominal screw size. It does not mean an 8 mm outside diameter. The verified default mesh has an outside diameter of 18.4 mm and a thickness of 1.6 mm. The outside diameter and thickness follow the upstream library rather than independent fields in this interface.
A plastic washer behaves differently from a metal washer under tightening, heat or sustained load. This generator provides geometry without a rated mechanical specification. Keep a source ZIP if you need to revisit the exact nominal size, or edit the original source in desktop OpenSCAD for geometry beyond the available control.
Default values and parameter ranges
- Nominal screw diameter
- Default 8 mm; range 3 to 24 mm
Default mesh example: 18.4 × 18.4 × 1.6 mm. These are dimensions of the rendered source model, not measurements of a physical print. Your live preview reports the outside dimensions for your selected values.
Original design: Ryan A. Colyer. License: CC0-1.0. Original project and license. Source revision 4ae9aeb3b136. Download Source + license above to retain the source, notices and your parameter setup.










