Prusa CORE One 3D Printer Specifications
Manufacturer: Prusa. Technology: FDM / FFF.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build width: 250 mm Source
- Build depth: 220 mm Source
- Build height: 270 mm Source
- Enclosure: Fully enclosed Source
- Maximum chamber temperature: 55 C Source
- Motion system: CoreXY Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.
Overview
The Prusa CORE One is an enclosed CoreXY FFF printer with a fixed 250 × 220 × 270 mm build volume and active chamber temperature control. This page covers the original CORE One; CORE One+ and other family variants may have different configurations.
A good fit for
- Printing engineering materials in an enclosed printer, subject to material and setup requirements in the handbook.
Keep in mind
- This is the original CORE One profile; check the exact revision and included configuration when buying.
- No hands-on performance testing is represented here.
Buying advice
Prusa's current product destination is labeled CORE One+ (Gen 2), so this guide does not link it as a buying page for the original CORE One. No exact-original buying destination was verified for this packet.
Accessories and replacement parts
Prusa's support page provides documentation for the CORE One. This packet does not assert MMU3 compatibility because the cited resources do not establish it.
Reviews and guides
No canonical GoodPrints3D standalone review link was verified for this exact model during this research pass.