Bambu Lab X1 Carbon 3D Printer Specifications
Bambu Lab X1 Carbon
Printer details
Manufacturer: Bambu Lab. Technology: FDM / FFF.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build envelope: Published build envelope — Bambu Lab X1-Carbon (standalone model; specification is not bundle-specific): 256 × 256 × 256 mm Source
- Build width: 256 mm Source
- Build depth: 256 mm Source
- Build height: 256 mm Source
- Machine width: 389 mm Source
- Machine depth: 389 mm Source
- Machine height: 457 mm Source
- Machine weight: 14.13 kg Source
- Enclosure: Enclosed, aluminum and glass Source
- Maximum hotend temperature: 300 C Source
- Filament diameter: 1.75 mm Source
- Included nozzle diameter: 0.4 mm Source
- Included nozzle material: Hardened steel Source
- Automatic bed leveling: Yes Source
- Filament runout detection: Yes Source
- Power loss recovery: Yes Source
- Included camera: Yes Source
- Advertised maximum speed: 500 mm/s Source
- Advertised maximum acceleration: 20000 mm/s2 Source
- Open-source printer: No Source
- Manufacturer material guidance: PLA, PETG, TPU, ABS, ASA, PVA, PET, PA, PC and compatible fiber-reinforced polymers Source
- Air filtration: Activated carbon filter Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.
Overview
The X1-Carbon is an enclosed FFF/FDM printer with a manufacturer-rated 256 × 256 × 256 mm build envelope. Bambu Lab lists an aluminum-and-glass shell, hardened-steel nozzle, 300 °C maximum hot-end temperature, built-in activated-carbon filter, and a 1080p chamber camera. The advertised 500 mm/s toolhead speed and 20 m/s² acceleration are manufacturer maxima, not independent print-quality or throughput results.
Bambu Lab has announced the X1 series, including X1-Carbon, is retired. It says manufacturing and active sales ended on March 31, 2026; authorized distributors may still have remaining stock, which this packet does not verify.
Buying advice
No exact-model US checkout destination was independently verified in this pass.
Accessories and replacement parts
The specification sheet lists 0.2, 0.6, and 0.8 mm optional nozzle diameters and says filament odometry is optional with AMS. Confirm the exact printer revision and accessory configuration before ordering; this research pass did not verify a compatible replacement-parts destination.
Reviews and guides
This is a source-based overview, not a hands-on test. Advertised speed, acceleration, and hot-end limits should not be read as independently measured print performance.