Using the Gridfinity baseplate generator
Create the base grid for a drawer, bench or collection of Gridfinity bins. This tool exposes the Gridfinity Rebuilt baseplate's footprint, supported plate styles and optional magnet holes. The preview shows the generated geometry, including the outside footprint you need to fit on a printer bed.
- Measure the storage space and choose a Width and Depth in grid units.
- Select Thin, Skeletonized or Screw together as the base style, then decide whether you need magnet holes.
- Check the outside dimensions against your build plate before downloading the STL.
Plan the grid around your build plate
Each grid unit adds 42 mm to the baseplate footprint. The default 2 by 2 thin plate measures 84 by 84 mm and is 5 mm tall in the generated mesh. Bin and baseplate footprints differ slightly because the bins include clearance for their grid cells.
A drawer can need a larger baseplate than a printer can produce in one piece. Choose smaller sections that fit your build plate and check the intended arrangement in the drawer. Changing the plate style changes its geometry, so inspect the new preview and slicer result rather than assuming the same material use or print time.
Default values and parameter ranges
- Width
- Default 2 grid units; range 1 to 5 grid units
- Depth
- Default 2 grid units; range 1 to 5 grid units
- Base style
- Thin; choices: Thin, Skeletonized, Screw together
- 6 x 2 mm magnet holes
- Off
Default mesh example: 84.0 × 84.0 × 5.0 mm. These are dimensions of the rendered source model, not measurements of a physical print. Your live preview reports the outside dimensions for your selected values.
Original design: Kenneth Hodson, Zachary Freedman and contributors. License: MIT. Original project and license. Source revision 910e22d8607f. Download Source + license above to retain the source, notices and your parameter setup.










