Using the Workshop funnel generator
Size a funnel around a workshop container and the opening you need to reach. Jerry van Heerikhuize's generator exposes bowl and stem geometry, wall thickness and optional handles. The preview includes those features in its outside measurements, helping you check the complete shape before export.
- Measure the destination opening and decide on a stem radius and height.
- Choose the bowl radius, bowl height and wall thickness, then toggle the handles you need.
- Inspect the full envelope and export a sample to check the stem fit.
Radius controls and the complete footprint
The opening controls use radii, rather than diameters. For example, a bowl inner radius of 35 mm describes a 70 mm inner diameter before accounting for walls and other features. The bowl, stem and handles all contribute to the generated mesh; the complete outside dimensions can be much larger than an opening value.
The default funnel, including its first handle, has a verified bounding box of 84 by 156 by 70 mm. Handle choices can matter for build-plate fit, so inspect the model after changing them. This workshop tool makes no food-safety or chemical-compatibility claim: those depend on the material, printing process and intended use.
Default values and parameter ranges
- Bowl opening radius
- Default 35 mm; range 25 to 80 mm
- Bowl height
- Default 40 mm; range 15 to 100 mm
- Stem opening radius
- Default 5 mm; range 2 to 10 mm
- Upper stem radius
- Default 5 mm; range 2 to 10 mm
- Stem height
- Default 30 mm; range 10 to 100 mm
- Wall thickness
- Default 2 mm; range 1 to 4 mm
- First handle
- On
- Second handle
- Off
Default mesh example: 84.0 × 156.0 × 70.0 mm. These are dimensions of the rendered source model, not measurements of a physical print. Your live preview reports the outside dimensions for your selected values.
Original design: Jerry van Heerikhuize. License: Apache-2.0. Original project and license. Source revision 20d758478d12. Download Source + license above to retain the source, notices and your parameter setup.










