Anycubic i3 Mega S Review: Worth Buying Used?

Anycubic i3 Mega S 3D printer with frame, touchscreen and Ultrabase bed.

Is the Anycubic Mega S still worth buying?

The Anycubic i3 Mega S can be a useful used project printer for someone willing to inspect, level and maintain an older machine. Its 210 × 210 × 205 mm build area, metal frame and Ultrabase bed are practical, but condition and access to compatible parts matter. A supported newer printer is a better starting point if you want less troubleshooting.

See the Anycubic i3 Mega S printer hub for reviewed specifications and join the exact-model owner discussion. GoodPrints did not hands-on test this printer. This assessment uses manufacturer documentation and attributed independent reviews.

Who should consider it?

Consider a used unit if you enjoy learning setup and repairs, mainly need a modest build area, and can see the actual machine produce a clean first layer. Choose a current, supported printer if you want a warranty, automatic setup or minimal maintenance. A seemingly inexpensive used machine can cost more in parts and time than expected.

Identity, availability and key specifications

This is the Mega S, also called the i3 Mega S, not the original i3 Mega or the Mega X. As checked on November 15, 2026, Anycubic's exact-model product page listed it as sold out; the manufacturer also has an end-of-life listing. We have not verified a current exact-model US checkout route. The product page is useful for identification, not a confirmed buying link.

  • Process and space: FDM/FFF, with a 210 × 210 × 205 mm build envelope.
  • Extrusion: Titan extruder, one 0.4 mm nozzle and 1.75 mm filament.
  • Materials: Anycubic lists PLA, TPU, ABS, HIPS and wood-filled filament. A listing is not a guarantee that every formulation will print well; nozzle, settings, ventilation and machine condition matter.
  • Workflow: SD card and USB, with the manufacturer describing USB as for expert users; filament runout detection and power-loss recovery are listed features.
  • Temperature: TechGearLab reports a maximum hotend temperature of 260 °C. Confirm material settings and the condition of heating components; a maximum is not a recommended operating temperature for every filament.

What the reviews tell us

Electromaker's independent review reported good bed adhesion and successful prints on its test unit. TechGearLab's review reported mixed print results. These observations concern individual machines and test conditions, so neither predicts the condition of a particular used printer. Ask to see the machine you would receive print, rather than relying on sample photos alone.

Materials, setup and maintenance

Start with a known PLA filament and an exact-model slicer profile, then tune the first layer and temperature for the filament. Flexible TPU may require slower feeding and careful tuning. ABS and HIPS can need controlled conditions and appropriate ventilation; evaluate the material manufacturer's safety guidance and your workspace before printing. Do not assume that the machine's listed hotend limit makes every material safe or practical.

Anycubic's Mega M/S resources include manuals, software, firmware and setup videos. The page also covers other Mega models, so check the exact model label before downloading firmware. Use SD for a straightforward local workflow and verify the slicer's settings for this machine.

Inspect the bed surface, nozzle, belts, moving parts and cables. Power down, unplug and allow the machine to cool before mechanical maintenance, unless the maker's procedure explicitly requires otherwise. Damaged insulation, scorched connectors or improvised mains wiring are reasons not to energize it. Verify replacement part compatibility before buying.

Used-buy checklist and running costs

  • Match the machine label and physical configuration to the exact Mega S product information.
  • Ask the seller to start from cold, home the axes, heat the nozzle and bed, feed filament and print a broad first layer. Test the SD workflow and runout sensor where practical.
  • Inspect the glass, motion, belts, connectors and cable strain relief. Walk away from unsafe wiring or unstable temperatures.
  • Check the availability of compatible wear parts and model-specific electronics before committing. Budget for filament, electricity, maintenance supplies, replacement parts and the time to diagnose and tune.

Alternatives and verdict

The original i3 Mega is a separate predecessor and also deserves a careful condition check. For a different legacy option, compare the Kobra Neo review and our Mega S vs Kobra Neo comparison; compare any candidate's current support and condition before deciding. A currently supported printer may be preferable when ease of setup and parts support matter more than a repair project.

The Mega S makes sense when the specific unit is safe, demonstrably working and leaves room in the budget for upkeep. Its end-of-life status and mixed independent results make a thorough inspection more valuable than a low asking price alone.