Anycubic i3 Mega Review: Still Worth Buying Used?

Official front product image of the Anycubic i3 Mega open-frame 3D printer

Amazon option: Used-printer bench kit: 40-piece tool set

Shop on Amazon

Is the Anycubic i3 Mega still worth buying?

The Anycubic i3 Mega is worth considering only as a low-cost, testable used printer. Its rigid metal frame, Ultrabase bed, touchscreen, and offline SD-card workflow remain useful, but the Mega line is sold out and modern entry-level printers require less setup. Buy one only after a live print and careful parts inspection.

Research disclosure: GoodPrints did not hands-on test this printer. This review is based on Anycubic's product and support documentation, current availability checks, and hands-on reports from Pevly and io3dprint. Their observations describe review units from the i3 Mega's active-market years; a used machine's present condition matters more than any historical sample result.

Who the i3 Mega fits—and who should skip it

Consider a used i3 Mega if you already understand manual bed leveling, want a sturdy open-frame printer for mostly PLA or PETG, and can inspect and repair an older machine. Its 210 × 210 × 205 mm build area is still practical for brackets, organizers, enclosures, props in sections, and ordinary hobby projects. Local pickup is much safer than an untested shipped listing.

Skip it if this is your first printer, you need a warranty, automatic leveling, fast modern motion, quiet operation, network control, or predictable replacement-part support. Also skip it for unattended business production or temperature-sensitive materials. A cheap machine can become expensive once a damaged bed, tired fans, worn bearings, belts, hotend parts, and troubleshooting time are included.

Exact model and lifecycle context

This article covers the Anycubic i3 Mega, including the later Ultrabase-equipped listing represented on Anycubic's exact product page. It does not cover the i3 Mega S, Mega X, Mega Pro, or Mega Zero. Used listings frequently blur those names, so compare the machine, extruder, spool holder, bed branding, electronics, and seller photos rather than trusting the listing title alone.

Anycubic's product page remains online but states that all Mega-series printers are sold out and directs shoppers to the Kobra line. The page's comparison table distinguishes the i3 Mega from the Mega S: both list the same build area, while the S lists a Titan extruder and suspended filament rack that the base i3 Mega does not. Anycubic also retains a Mega-series resource page with the Mega manual, firmware, drivers, and older Cura download. That documentation is useful, but it does not make the printer a current retail product.

Verified Anycubic i3 Mega specifications

Area Published specification What it means now
Process Open-frame, single-nozzle FDM printer Best treated as an everyday filament machine, not an enclosed engineering-material system.
Build volume 210 × 210 × 205 mm Useful midsize capacity, though smaller than many current full-size desktop printers.
Layer range 0.05–0.30 mm A manufacturer range, not a guarantee that every model benefits from a 0.05 mm layer.
Nozzle and filament 0.4 mm nozzle; 1.75 mm filament Common dimensions help with consumables, but confirm heater, thermistor, connector, voltage, and mechanical fit before ordering replacement assemblies.
Temperature limits 260°C maximum extruder; 110°C maximum bed Maximum settings do not override the open frame, hotend condition, ventilation needs, or material-specific requirements.
Speed 20–100 mm/s published range Historical reviews valued reliability and quality more than headline speed. It is slow beside modern high-acceleration machines.
Bed and leveling Heated Ultrabase glass platform with manual four-point leveling The coated glass can hold a first layer well and release parts when cool, but damage, residue, flatness, and heater performance must be checked on a used unit.
Controls 3.5-inch color touchscreen, SD card, and USB connection SD-card printing keeps the core workflow offline. Do not expect built-in Wi-Fi, a camera, or a current cloud ecosystem.
Chassis 405 × 410 × 453 mm printer; dual-Z metal-frame design The rigid construction is a real strength, but shipping an assembled older frame can still knock motion components out of alignment.

What still holds up

The i3 Mega's strongest feature is its physical structure. Anycubic describes a rigid metal frame and quick eight-screw assembly. Pevly's hands-on report likewise praised the stable construction, cable management, simple setup, and useful touchscreen. io3dprint found the Ultrabase version straightforward to assemble and level, with a flat review bed and a successful first print. Those reports support the design's original appeal without proving the condition of a machine being sold years later.

The Ultrabase bed is the other enduring advantage. The textured glass was designed to grip while hot and release after cooling, reducing the need for tape or glue in ordinary PLA work. The front touchscreen and SD-card workflow also make the printer usable without an account or cloud service. Anycubic's retained manual and firmware links are valuable for an owner willing to maintain a legacy platform.

Limitations that matter in 2026

The i3 Mega belongs to an earlier desktop-printer generation. Bed leveling is manual, motion is comparatively slow, and the Bowden-style filament path is less forgiving with very soft flexible filament than a modern direct-drive setup. Pevly reported a simple interface but a touchscreen that sometimes needed a firmer or repeated press. Historical review praise should not be translated into a claim that every surviving unit is quiet, calibrated, or reliable.

Material marketing also needs context. Anycubic's technical list names PLA, ABS, HIPS, and wood, while its comparison table also mentions PETG. The open frame makes ABS- and HIPS-class work sensitive to drafts and room conditions, and fumes require appropriate ventilation. Filled or wood-style filament can increase clogging and nozzle-wear risk. For most used buyers, PLA and PETG are the more realistic starting point after confirming hotend and bed performance.

Lifecycle is the decisive drawback. A sold-out printer can still have community knowledge and third-party parts, but compatibility is not automatic. Revisions may differ, and an inexpensive generic component can have the wrong connector, sensor type, voltage, dimensions, or firmware expectation. Anycubic's archived resources reduce documentation risk; they do not restore a new-printer warranty or guarantee inventory of exact assemblies.

Used-buy inspection and ownership cost

  • Identify the exact variant: photograph the model label, extruder, mainboard area, hotend wiring, spool holder, and Ultrabase markings. Do not pay Mega S money for a base Mega described loosely.
  • Run a complete live test: start cold, home every axis, heat the nozzle and full bed, load filament through the sensor, level all four corners, and print a broad first-layer pattern followed by a taller part.
  • Inspect the glass and heater: look for chips, lifted coating, deep residue, cold areas, damaged clips, cable strain, and temperature errors. The bed is central to this model's value.
  • Check motion and cooling: examine belts, rods, bearings, Z leadscrews, couplers, fans, endstops, wiring, and toolhead play. Listen for grinding or intermittent fans and confirm both Z sides move evenly.
  • Test controls and recovery: verify the touchscreen, SD reader, filament-out pause, and power-loss resume with a safe test file. Save the correct manual and stock firmware before experimenting with modifications.

Budget for nozzles, a hotend service, fans, belts, build-surface replacement, lubricant, and possibly electronics troubleshooting. Price the machine against a new printer after adding those items and the value of your time. If the seller cannot demonstrate a clean first layer and sustained extrusion, value it as a repair project rather than a working printer.

Better current alternatives

  • For a simpler first printer: the Creality Ender-3 V3 SE review covers a more modern budget path with automatic setup features.
  • For a polished everyday open-frame workflow: compare the Bambu Lab A1 review. It costs more than many used Megas but removes much of the manual legacy-printer work.
  • For a current Anycubic path: see the Anycubic Kobra 3 review for newer motion, a larger build area, and optional multicolor expansion.

The GoodPrints 3D printer review directory provides more exact-model comparisons before you commit to a used machine.

Final verdict

The Anycubic i3 Mega earned its reputation through sturdy construction, a useful Ultrabase bed, simple controls, and approachable assembly. Those strengths survive in a well-kept unit, but the buying decision has changed: it is now a sold-out legacy printer competing with faster machines that automate the setup work. It makes sense only when the exact unit prints properly, the price leaves room for repairs, and the buyer wants a maintainable offline project. First-time buyers and anyone who needs predictable uptime should choose a current model.

Sources checked

Amazon fit note: This is a general cleanup, finishing, and basic service bundle for a repair-minded used-printer bench, not an i3 Mega replacement-parts kit. Confirm the delivered contents and tool sizes before relying on it, power down and cool the printer before service, and use the model-specific manual for wiring, hotend, bed, and motion work. The bundle does not replace a diagnostic meter, calibrated torque tool, PPE, or exact-compatible fans, heaters, sensors, belts, bearings, connectors, or firmware.

Recommended: Used-printer bench kit: 40-piece tool set
Shop on Amazon