Anycubic i3 Mega S 3D Printer Specifications

Printer hub

Anycubic i3 Mega S

The Anycubic i3 Mega S is a single-extruder FFF/FDM printer with a manufacturer-published 210 × 210 × 205 mm shared build envelope for the standalone model. The catalog’s exact-configuration build observation and independent review prese...

Printer details

Manufacturer: Anycubic. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build envelope: Published build envelope — Anycubic i3 Mega S, US standalone SKU MSA4BK-Y-M: 210 × 210 × 205 mm Source
  • Machine weight: 11 kg Source
  • Maximum hotend temperature: 260 C Source
  • Filament diameter: 1.75 mm Source
  • Included nozzle diameter: 0.4 mm Source
  • Extruder type: Titan extruder Source
  • Filament runout detection: Yes Source
  • Power loss recovery: Yes Source
  • USB printing: Yes Source
  • Offline printing: Yes Source
  • Advertised maximum speed: 100 mm/s Source
  • Extruders: 1 Source
  • Manufacturer material guidance: TPU, PLA, ABS, HIPS, wood Source
  • Compatible slicers: Cura 15.04.6 for macOS and Windows Source
  • Supported operating systems: Windows; macOS Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Anycubic i3 Mega S printer
Anycubic i3 Mega S Credit: Image: Anycubic.

Overview

The Anycubic i3 Mega S is a single-extruder FFF/FDM printer with a manufacturer-published 210 × 210 × 205 mm shared build envelope for the standalone model. The catalog’s exact-configuration build observation and independent review preserve this as one whole-job workspace.

Anycubic lists a Titan extruder, filament runout sensor, power-loss resume, SD-card printing and USB connectivity, with USB marked for expert users only. The official page lists TPU, PLA, ABS, HIPS and wood as supported materials; this is a manufacturer compatibility statement, not a performance guarantee.

Buying advice

The US manufacturer listing currently marks the i3 Mega S sold out and recommends a newer model. This page is useful for checking the manufacturer’s status, but it is not a verified checkout route. No current exact-model US purchase destination is established by the evidence in this research packet.

Check Anycubic’s i3 Mega S listing

Accessories and replacement parts

Anycubic lists a scraper, pliers, tool set, card reader, SD card, USB cable and power cord in the package contents. Its model-specific support article provides the i3 Mega S manual, firmware, drivers, Cura 15.04.6 downloads and video tutorials. Check exact model labeling before downloading firmware; the same support page also lists resources for the older i3 Mega.

i3 Mega S manual, firmware and setup resources

Reviews and guides

Useful documented strengths include the rigid metal frame, Ultrabase platform, flexible-filament Titan extruder and power-loss resume. Anycubic states a maximum print speed of 100 mm/s and a layer resolution down to 50 microns; these are manufacturer specifications, not independently measured print-quality or throughput results. The available evidence does not establish an enclosure or a current seller, so treat both as unknown rather than assuming them.

Anycubic i3 Mega S buyer assessment

Anycubic i3 Mega S vs Kobra Neo comparison