Anycubic i3 Mega S vs Kobra Neo: Which Used Printer Fits?

Anycubic i3 Mega S 3D printer with frame, touchscreen and Ultrabase bed.

The Anycubic Kobra Neo is the more convenient choice on paper if automatic bed compensation and a removable flexible plate matter to you. The i3 Mega S can still suit a hands-on owner who finds a safe, working example and is comfortable with setup and repairs. Both are older models, so the condition, parts and total cost of the actual machine matter more than a specification sheet alone. GoodPrints has not tested these printers head to head.

Start with the i3 Mega S printer hub and our Mega S buyer assessment. For the other model, see the Kobra Neo review. This comparison covers the original Kobra Neo, not the Kobra 2 Neo.

What changes between the two?

Feature i3 Mega S Kobra Neo
Build volume 210 × 210 × 205 mm 220 × 220 × 250 mm
Bed and leveling Ultrabase glass; inspect its surface and first layer Removable magnetic PEI-coated spring steel; 25-point LeviQ automatic compensation
Extrusion Titan extruder Direct extruder integrated with the hotend
Filament sensor Listed as a feature Optional, so check the individual machine
File workflow SD card; USB is described for expert users SD card

These are manufacturer descriptions, not measured performance. See the Mega S specifications and Kobra Neo specifications. The Neo's extra height may matter for tall parts, but measure the objects you plan to make rather than buying on volume alone.

Setup, materials and daily use

The Neo's automatic compensation can reduce the work of mapping bed unevenness, but it does not remove the need to set a good first layer or repair worn hardware. Its flexible plate can be removed and bent to release a cooled print. The Mega S uses an Ultrabase surface; check an individual plate for chips, damage and adhesion before buying.

Both manufacturer pages list PLA and TPU, and each lists ABS. Mega S also lists HIPS and wood-filled material, while Neo lists PETG. Start with a known PLA and a profile for the exact machine. TPU may require slower feeding and tuning. ABS and HIPS can need controlled conditions and suitable ventilation; consult the filament maker's safety guidance. A listed material is not a promise that every formulation will work safely or well in every workspace.

Use the Mega M/S resources or the Kobra Neo wiki for setup and troubleshooting. Match firmware and slicer settings to the actual model; similar names are not interchangeable.

Buying and maintenance

On November 15, 2026, Anycubic's linked product pages showed both models as sold out. Those pages identify the machines and their features; they are not verified checkout routes. Verify current availability and support independently, and consider a currently supported printer if a warranty and easier replacement parts are priorities.

For either used machine, ask for a cold start, homing, heating, filament feed and a broad first-layer print from the exact unit. Inspect the bed, belts, motion, cables and connectors. Do not energize a machine with scorched connectors, damaged insulation or improvised mains wiring. Unplug and let it cool before mechanical maintenance unless the manufacturer's procedure explicitly requires otherwise.

Allow for filament, electricity, maintenance supplies, compatible replacement parts and your own diagnostic time. Check part compatibility before buying; a low asking price does not establish a low total cost. Join the Mega S owner discussion for model-specific context.

Which should you choose?

Choose a demonstrably sound Kobra Neo if its larger build space, direct extruder and automatic bed compensation match your needs. Choose a demonstrably sound Mega S if you value a repair project and its smaller build space is sufficient. Neither specification list establishes a print-quality winner, and an unsafe or poorly maintained example of either is a poor purchase.

Featured image: Anycubic i3 Mega S. Image credit: Anycubic.