Phrozen Sonic Mini 8K 3D Printer Specifications

Printer hub

Phrozen Sonic Mini 8K

The Phrozen Sonic Mini 8K is an LCD resin printer. Phrozen specifies a 165 × 71.28 × 180 mm build volume in its slicer setup table. Its model support page lists 22 µm XY resolution, 0.01 to 0.30 mm layer thickness, a 3.5 inch touch panel...

Printer details

Manufacturer: Phrozen. Technology: Resin.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build volume: Standard build area: Phrozen Sonic Mini 8K: 165 × 71.28 × 180 mm Source
  • Build width: 165 mm Source
  • Build depth: 71.28 mm Source
  • Build height: 180 mm Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Overview

The Phrozen Sonic Mini 8K is an LCD resin printer. Phrozen specifies a 165 × 71.28 × 180 mm build volume in its slicer setup table. Its model support page lists 22 µm XY resolution, 0.01 to 0.30 mm layer thickness, a 3.5 inch touch panel, front USB, and CHITUBOX 1.9.0 or above. These are manufacturer specifications, not measured print results.

A good fit for

  • Resin prints that fit within the documented 165 × 71.28 × 180 mm build volume.
  • Users who want an LCD resin workflow with an official CHITUBOX setup entry.

Keep in mind

  • Phrozen lists a maximum printing speed of 80 mm per hour; actual print time depends on the model, resin and settings.
  • Resin printing requires resin handling and post-processing; the manufacturer lists resin-specific setup and post-processing resources.

Official Sonic Mini 8K specifications and owner resources

Buying advice

Current availability and a verified purchase destination for the Phrozen Sonic Mini 8K have not been established. The Sonic Mini 8K S is a separate model and is not covered by this entry.

Accessories and replacement parts

Phrozen's film compatibility table lists 210 × 290 mm FEP and nFEP film for the Sonic Mini 8K. Check the film and vat version against your printer before ordering. Phrozen also provides model-specific setup, resin profile, calibration, LCD test, cleaning, post-processing and replacement-part instructions.

FEP and nFEP film compatibility table

Sonic Mini 8K owner resources and resin profile

Reviews and guides

GoodPrints3D has a buyer's guide and a direct comparison for this model. These articles do not report hands-on testing; no independent print-quality, reliability or speed test was verified for this research.

Is the Phrozen Sonic Mini 8K worth buying?

Phrozen Sonic Mini 8K vs ELEGOO Mars 4 Ultra