Phrozen Sonic Mini 8K vs ELEGOO Mars 4 Ultra: Which Resin Printer Fits Your Work?

GoodPrints3D logo

GoodPrints3D site logo; this is site branding, not a photograph of either printer.

If your resin jobs need more length or height, the Phrozen Sonic Mini 8K has the edge on those listed build axes; if they need more width, the ELEGOO Mars 4 Ultra does. Their build spaces do not contain one another on every axis, so load a representative supported model in the slicer before choosing. GoodPrints3D has not hands-on tested these printers for this comparison; the specifications below are manufacturer figures, not measured print results.

This is the original Phrozen Sonic Mini 8K, not the separately named Sonic Mini 8K S. Check the exact model name when comparing listings, profiles and replacement parts.

Specifications at a glance

Specification Phrozen Sonic Mini 8K ELEGOO Mars 4 Ultra
Build dimensions (X × Y × Z) 165 × 71.28 × 180 mm 153.36 × 77.76 × 165 mm
Approximate nominal envelope volume 2.117 L 1.968 L
Listed XY resolution 22 µm 18 µm
Screen pixel grid 7500 × 3240 8520 × 4320
Listed maximum speed 80 mm/h Up to 150 mm/h under ELEGOO's stated ACF film and resin conditions

Phrozen's values come from its exact-model slicer setup table; ELEGOO's figures come from its Mars 4 Ultra specification page. The volumes are calculated from the listed dimensions and describe nominal rectangular envelopes, not measured usable space. Leave clearance for orientation, rafts and supports.

Compare the axes against your parts

The Sonic Mini 8K lists 11.64 mm more X space and 15 mm more Z space. The Mars 4 Ultra lists 6.48 mm more Y space. Neither is larger on every axis. A tall part or a layout that needs extra X length may suit the Phrozen dimensions; a wider part may suit the Mars dimensions. Whether a part fits depends on its orientation and supports, so check your actual files rather than deciding from the total volume alone.

Before buying, slice one of your largest recurring models on each exact machine profile. Include the intended orientation, raft, supports and clearance. If the model crosses the build boundary, decide whether reorientation or splitting is acceptable; splitting adds assembly and finishing work. For frequent large single-piece prints, compare a larger machine and the space required for its resin workflow.

Resolution is a specification, not a print-quality verdict

Phrozen lists 22 µm XY resolution and a 7500 × 3240 pixel grid. ELEGOO lists 18 µm and 8520 × 4320. Those figures describe the manufacturers' screens and pixel scale; they do not establish dimensional accuracy, surface finish or which printer will produce the better part. Resin choice, exposure, optics, orientation, supports and post-processing also affect a result.

Do not compare maximum speeds as job times

Phrozen lists a maximum of 80 mm/h. ELEGOO advertises up to 150 mm/h with ACF release liner film and its specified rapid standard resin. The claims use different stated conditions and are not a matched speed test. Slice a representative job with the resin and settings you plan to use, and include washing, curing and cleanup when estimating the time for a finished part.

Plan for the whole resin workflow

Both are resin printers. Budget room and time for uncured-resin handling, washing, drying, post-curing, equipment cleanup and waste management. Follow the selected resin's safety data sheet and each printer and material maker's handling instructions. Check current warranty terms, replacement screen and film availability, and delivered cost for the exact unit and region before purchasing; this comparison does not verify current offers.

Which one fits your work?

Choose between these two by checking the parts you actually make. The Sonic Mini 8K's listed X and Z dimensions may help when your supported layouts need more length or height. The Mars 4 Ultra's wider Y dimension may help when parts or batches need more width. The Phrozen has a larger calculated nominal envelope, but that total cannot replace checking each axis. Neither a higher pixel count nor a maximum speed claim proves better finished prints or shorter real job times.

For the original Phrozen, read our Sonic Mini 8K buyer guide, visit the printer hub or see the owner discussion. For the Mars, see the ELEGOO Mars 4 Ultra buyer guide and printer hub.

Sources: Phrozen's exact Sonic Mini 8K slicer dimensions and pixel grid; Phrozen Sonic Mini 8K support specifications; and ELEGOO Mars 4 Ultra official specifications.