Original Prusa MK4 3D Printer Specifications

Printer hub

Original Prusa MK4

The Original Prusa MK4 is a single-nozzle FFF/FDM printer with a manufacturer-listed 250 x 210 x 220 mm build area. Prusa's support site maintains model-specific setup, use, maintenance and troubleshooting resources for the MK4.

Printer details

Manufacturer: Prusa Research. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build volume: Standard build area: Original Prusa MK4: 250 × 210 × 220 mm Source
  • Build width: 250 mm Source
  • Build depth: 210 mm Source
  • Build height: 220 mm Source
  • Machine weight: 7 kg Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Overview

The Original Prusa MK4 is a single-nozzle FFF/FDM printer with a manufacturer-listed 250 x 210 x 220 mm build area. Prusa's support site maintains model-specific setup, use, maintenance and troubleshooting resources for the MK4.

The manufacturer lists both kit and pre-assembled purchase formats in its buyers guide. The kit assembly is documented as a nine-chapter process; it is a separate choice from the printer's hardware configuration.

A good fit for

  • People who want a model-specific support and assembly knowledge base from the manufacturer.
  • Buyers who value a choice between kit assembly and a pre-assembled printer, where available.

Keep in mind

  • The stated 250 x 210 x 220 mm is the build area, not the printer's outside dimensions.
  • Optional MMU3 multi-material capability requires the compatible MK4/S MMU3 package and matching firmware and slicer profiles; it is not the standard single-material configuration.

Original Prusa MK4 support and downloads

Buying advice

Buying route gap: I could not verify a current official purchase page for the exact original MK4. Prusa's current printer listing found during this check is for the MK4S, a distinct model, so it is not presented as an MK4 offer. Confirm the exact model and configuration with the seller before buying.

Accessories and replacement parts

Prusa's MK4 support pages document the optional MMU3 multi-material unit for the MK4/S family and list MK4 spare parts. Check the package and compatibility guidance for the exact printer and firmware before selecting an MMU or replacement part.

MMU3 compatibility guidance

MK4 spare parts

Reviews and guides

The manufacturer maintains model-specific setup, maintenance and troubleshooting documentation for owners. No exact-model editorial review link has been verified for this guide packet.

Original Prusa MK4 buyer guide

Original Prusa MK4 vs Bambu Lab P1S comparison