Original Prusa MK4 vs Bambu Lab P1S: Build Volume and Configuration Compared
The Original Prusa MK4 and Bambu Lab P1S are filament 3D printers with different buying considerations. Bambu Lab specifies a larger build volume on each axis for the P1S, which has an enclosed body. Prusa documented the MK4 as a kit or assembled machine and offers an enclosure separately. The better fit depends on the parts you want to make, your workspace and the configuration you actually buy.
For more about the MK4, see the specifications and resources hub and buyer guide. You can also visit the Original Prusa MK4 owner discussion for community perspectives.
Build volume: compare each axis
Prusa lists the MK4 at 250 × 210 × 220 mm (X × Y × Z). Bambu Lab lists the P1S at 256 × 256 × 256 mm (width × depth × height). On those stated dimensions, the P1S has 6 mm more width, 46 mm more depth and 36 mm more height. The depth difference is the largest of the three.
Start with the dimensions of a representative part and consider how it will be oriented on the bed. A tall narrow part and a wide flat part place different demands on the available axes. Also allow for the arrangement of multiple pieces and any supports or bed adhesion features your slicer may add. A nominal build volume is a useful first filter, but it does not establish that every model will fit or print successfully.
If a part is close to a limit, check it in the appropriate slicer with the intended orientation and settings before buying. Splitting a model into smaller pieces may be an option, but it adds assembly and may change the requirements for the finished part. The P1S offers more stated room in all three dimensions, while the MK4's listed space may already be sufficient for your work.
Enclosure and materials
The P1S has an enclosed body. Prusa lists an optional enclosure for the MK4, so include that separate configuration when planning a comparable workspace. Check the exterior space needed for the printer and any enclosure or accessories, rather than using build volume as a measure of desk space.
An enclosure can matter when planning materials and workspace, but its presence alone does not establish that a material or finished part is suitable. Read each manufacturer's current material, ventilation and operating guidance for the exact printer and setup. Consider where the machine will operate and how you will handle the materials you intend to use.
Assembly and the offer in front of you
Prusa documented both kit and assembled MK4 configurations. A kit involves assembly, so consider the time and work you want to invest before printing. An assembled offer changes that starting point, but the details of a particular listing still matter. Check whether it is a kit or assembled unit and what comes in the box.
For either printer, confirm the exact model, condition, included equipment, optional accessories, compatibility and support terms with the seller. Do not assume a multicolor accessory or enclosure is included in a particular offer. The MK4S is a separate model, so do not substitute its specifications or offers for the MK4.
Which should you consider?
Consider the P1S if its enclosed body and larger stated build dimensions match the parts and workspace you have in mind. Consider the MK4 if its build space fits your work and the choice between a kit and an assembled configuration matters to you. In both cases, check the current offer and manufacturer guidance before committing.
The comparison above focuses on documented dimensions and configuration. It does not rank print quality, reliability or speed, and it is not a hands-on assessment. Use the MK4 hub, buyer guide and owner discussion alongside manufacturer documentation to investigate the questions that matter to your own purchase.