LulzBot TAZ SideKick 289 3D Printer Specifications
LulzBot TAZ SideKick 289
The LulzBot TAZ SideKick 289 is the smaller SideKick model, with a 162 × 162 × 181 mm standard build area. LulzBot describes it as a filament printer and offers the SideKick in configurable toolhead and build-surface setups.
Printer details
Manufacturer: LulzBot. Technology: FDM / FFF.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build volume: Standard build area: LulzBot TAZ SideKick 289: 162 × 162 × 181 mm Source
- Build width: 162 mm Source
- Build depth: 162 mm Source
- Build height: 181 mm Source
- Maximum hotend temperature: 290 C Source
- Maximum bed temperature: 110 C Source
- Manufacturer material guidance: PLA, ABS, ASA, PETg, Nylon, TPU, PC-ABS, and polycarbonate; toolhead and setup dependent Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.

Overview
The LulzBot TAZ SideKick 289 is the smaller SideKick model, with a 162 × 162 × 181 mm standard build area. LulzBot describes it as a filament printer and offers the SideKick in configurable toolhead and build-surface setups.
A good fit for
- Choosing the smaller SideKick build space for models that fit within 162 × 162 × 181 mm.
Keep in mind
- The SideKick 747 has a larger build area; toolhead and build-surface configuration can vary.
- A B&H US listing was observed on November 18, 2026; broader current availability and used offers remain unverified, and listings may change.
Buying advice
LulzBot lists the 289 under Legacy printers and says it may be gone. A B&H Photo Video listing for the black KT-PR0057 configuration showed an in-stock status and Add to Cart control when checked on November 18, 2026; availability may change. This listing includes an SK175 0.5 mm toolhead and glass build surface with PEI. See the SideKick comparison for more context.
LulzBot legacy page and availability note
LulzBot TAZ SideKick 289 vs SideKick 747 comparison
B&H Photo Video listing for the black KT-PR0057 configuration
Accessories and replacement parts
The SideKick was offered with different toolheads, build surfaces and electronics options. Confirm the installed toolhead and filament diameter before selecting slicer settings or supplies. LulzBot's manual covers setup and operation for the 289 and 747; its open-hardware portal provides 289-specific assembly references.
Reviews and guides
No independent hands-on review or measured performance result was verified for this model during this research pass. The specifications and setup resources linked here are manufacturer materials, not independent test results.