LulzBot TAZ SideKick 289 vs TAZ SideKick 747: Compact Build or More Room?

LulzBot TAZ SideKick 289 3D printer

The LulzBot TAZ SideKick 289 and SideKick 747 are two build-size options in the same printer family. The 289 has a 162 × 162 × 181 mm build volume; the 747 expands that to 231 × 231 × 248 mm. Choose between them by measuring the parts you actually need to print and the space available for the machine. LulzBot labels the 289 a legacy model, and current exact-model availability, support, pricing, and condition of any individual unit are not verified here.

See the SideKick 289 specifications and owner resources or read or join the SideKick 289 owner discussion.

SideKick 289 vs 747 specifications

Specification SideKick 289 SideKick 747
Build volume 162 × 162 × 181 mm (4.75 L) 231 × 231 × 248 mm (13.24 L)
Operating footprint 22 × 25 in 24 × 28 in
Net weight 18.92 lb 20.35 lb
Bed leveling Genuine ANTCLABS BLTouch, as listed in the shared SideKick manual
Filament diameter 1.75 mm or 2.85 mm, depending on the selected toolhead

These figures come from LulzBot's SideKick 289/747 brochure and shared user guide. The dimensions describe manufacturer-stated build volumes, not guaranteed usable space for every part: allow clearance for supports, orientation, and the selected toolhead. The larger 747 footprint is also relevant if the printer must fit on an existing bench. The manual describes shared platform features, but the actual toolhead, bed surface, electronics, and included accessories depend on the individual configuration and seller listing.

Choose the 289 for a smaller build envelope

The 289 is the more compact option when parts fit within its stated 162 × 162 × 181 mm volume and bench space matters. Its smaller build envelope can rule out parts that fit the 747, so check the largest real model or component you expect to print rather than relying on a generic “desktop” label. LulzBot identifies the 289 as the smaller SideKick size and labels it legacy. We have not verified a current exact-model new-product listing or current support commitment.

Choose the 747 when you need more room

The 747 provides 231 × 231 × 248 mm of stated build volume, with a larger listed operating footprint and slightly higher net weight. It is the stronger fit of these two when a recurring part will not fit the 289 without splitting or scaling. That extra capacity does not establish faster printing, better print quality, current support, or better value. Check the exact 747 configuration and purchase terms before comparing a specific used unit with a 289.

What both models have in common

The SideKick user guide covers both sizes and describes a configurable platform: the filament diameter depends on the selected toolhead, and the family offers different build-platform and electronics options. Do not assume a listing includes a particular toolhead, filament path, bed surface, controller, or accessory. Ask for a photo of the actual machine and a written list of included parts. The shared guide is historical documentation; current software compatibility and replacement-part availability remain unverified.

How to compare a specific listing

  • Measure your largest intended part and compare it with the build volume, leaving practical room for orientation and supports.
  • Measure the bench area against the listed operating footprint, with extra clearance for access and cables.
  • Confirm the exact model label, installed toolhead, filament diameter, build surface, electronics, and accessories with the seller.
  • For a used machine, request recent photos and a demonstration of homing, probing, heating, and a complete print. These are buyer checks, not tests performed for this comparison.
  • Compare the actual asking price, shipping, missing parts, and repair needs. No current price, stock, warranty, or seller offer was verified for either exact model.

Sources and image credit

Specifications: LulzBot TAZ SideKick 289/747 brochure and LulzBot SideKick user guide. Model context: LulzBot SideKick 289 legacy page. The featured image shows the 289 and is credited to LulzBot's exact-model page.