Formlabs Fuse 1+ 30W 3D Printer Specifications

Printer hub

Formlabs Fuse 1+ 30W

The Formlabs Fuse 1+ 30W is a selective laser sintering (SLS) printer with a 30 W ytterbium fiber laser. Its nominal build volume is 165 × 165 × 300 mm (W × D × H). Formlabs lists a 110 micron layer thickness and a modular build chamber ...

Printer details

Manufacturer: Formlabs. Technology: SLS.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Formlabs Fuse 1+ 30W SLS printer
Fuse 1+ 30W product image from Formlabs. Credit: Formlabs.

Overview

The Formlabs Fuse 1+ 30W is a selective laser sintering (SLS) printer with a 30 W ytterbium fiber laser. Its nominal build volume is 165 × 165 × 300 mm (W × D × H). Formlabs lists a 110 micron layer thickness and a modular build chamber compatible with Fuse 1 generation printers and Fuse Sift.

This is a powder based production system. Material choice, refresh rate, atmosphere, packing and post processing affect workflow and output; the build envelope is not a promise of usable part yield or throughput.

A good fit for

  • Users evaluating SLS production of functional polymer parts within a 165 × 165 × 300 mm build envelope.
  • Teams choosing among Formlabs Fuse 1+ 30W compatible powder materials and powder workflow options.

Keep in mind

  • Plan for powder handling and post processing. Formlabs says powder recovery and media blasting are necessary for Nylon 11 CF; check the chosen powder workflow.
  • Nylon 11 Powder is recommended by Formlabs for use with nitrogen on Fuse 1+ 30W; an inert gas supply is an additional workflow requirement.

Buying advice

Formlabs presents the Fuse 1+ 30W through its product page with a Contact Sales route. No verified retailer offer, price or stock listing was present in the current catalog snapshot, so confirm configuration, included equipment and regional availability with Formlabs before purchase.

Buy the Fuse 1+ 30W Starter Package, 120 V from Formlabs

Accessories and replacement parts

Formlabs identifies the Fuse Sift as a compatible powder recovery station for the Fuse Series. Confirm the required powder handling, media blasting and other post processing equipment for the material and package you select; package contents can vary.

Fuse 1+ 30W Quick Start Guide

Choosing the right powder

Reviews and guides

Use the manufacturer’s technical specifications and setup guide as owner resources. They describe stated specifications and setup, not independent hands-on testing. No independently verified model-specific review article or canonical GoodPrints3D review URL was available in this research pass.

Fuse 1+ 30W buyer guide

EOS FORMIGA P 110 Velocis vs Fuse 1+ 30W comparison