Creality CR-10 S5 3D Printer Specifications
Creality CR-10 S5
The Creality CR-10 S5 is an FDM filament printer with a standard build volume of 500 × 500 × 500 mm and a Bowden extruder. Creality's comparison lists a single extruder, 0.4 mm nozzle, 1.75 mm filament, and a carborundum glass build surf...
Printer details
Manufacturer: Creality. Technology: FDM / FFF.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build volume: Standard build area: Creality CR-10 S5: 500 × 500 × 500 mm Source
- Build width: 500 mm Source
- Build depth: 500 mm Source
- Build height: 500 mm Source
- Extruder type: Bowden Extruder Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.

Overview
The Creality CR-10 S5 is an FDM filament printer with a standard build volume of 500 × 500 × 500 mm and a Bowden extruder. Creality's comparison lists a single extruder, 0.4 mm nozzle, 1.75 mm filament, and a carborundum glass build surface. The manufacturer marks this model as withdrawn.
A good fit for
- Large single-part projects that fit within a 500 × 500 × 500 mm build volume.
Keep in mind
- The manufacturer marks the CR-10 S5 as withdrawn; current availability is not established.
- Creality lists a maximum heatbed temperature of 60 °C and maximum nozzle temperature of 250 °C.
Buying advice
Creality's comparison marks the CR-10 S5 as withdrawn. I could not verify a current manufacturer checkout route for this exact model, so current new-unit availability is unknown.
Accessories and replacement parts
The CR-10 series manual includes the CR-10 S5 and provides setup, operation and maintenance instructions. No optional accessory compatibility is asserted here because an exact-model manufacturer compatibility source was not verified.
Reviews and guides
This guide summarizes manufacturer specifications and does not report hands-on testing or an independent product review. The documented 500 mm cube is unusually large for a single standard build area; confirm the printer's condition, configuration and included parts with a seller before buying used.