Creality CR-10 S5 vs CR-10 Max: Which Build Size Fits?
Featured image: GoodPrints3D logo. Source: GoodPrints3D.
The Creality CR-10 S5 and CR-10 Max are large-format FDM printers with different listed build areas. Creality lists a 500 × 500 × 500 mm build volume for the CR-10 S5 and 450 × 450 × 470 mm for the CR-10 Max. The S5 has 50 mm more width and depth on paper, while the Max has 30 mm more height. These are manufacturer specifications, not hands-on measurements or a promise that a particular used unit retains its original configuration.
The S5's manufacturer comparison entry is marked withdrawn. Current availability for either model is not established here. Review the exact unit, condition and seller support before buying.
For model-specific details, see the CR-10 S5 specifications hub and CR-10 Max specifications hub. Read the CR-10 S5 buyer guide and CR-10 Max buyer guide for purchase checks.
Build area and machine footprint
Creality lists the CR-10 S5's build area as 500 × 500 × 500 mm and its product dimensions as 800 × 790 × 715 mm. For the CR-10 Max, the same comparison lists a 450 × 450 × 470 mm build area and product dimensions of 650 × 785 × 735 mm. Product dimensions describe the printer, not the full clearance needed to operate or service it. Measure the intended installation space and allow room for access, cables and movement.
Use the slicer to check a model's orientation, supports and brim against the usable area of the particular machine. A larger nominal envelope can let some parts fit in one piece, but does not guarantee a successful print at the edges or establish print quality.
Other listed specifications
Creality lists a Bowden extruder, one extruder, standard 0.4 mm nozzle, 1.75 mm filament and FDM technology for both models. The comparison lists maximum nozzle temperatures of 250 °C for both, and maximum heatbed temperatures of 60 °C for the S5 and 100 °C for the Max. It lists a carborundum glass plate for the S5 and a frosted bed sticker for the Max. Confirm the fitted surface and hardware on the exact unit. Temperature limits alone do not establish material compatibility; check filament guidance and machine condition.
Which one fits your projects?
The S5's larger width and depth may be relevant if a planned part needs that extra footprint. The Max's listed build area is slightly taller and its listed machine dimensions are smaller in two of the three axes, though it is taller as a machine. Compare the actual part dimensions and printer footprint with your workspace instead of choosing from the build-volume total alone.
Both models require checking the offered machine's identity, modifications, condition, included parts and support. Creality marks the S5 withdrawn in its comparison; this article does not establish present stock, pricing, warranty terms or replacement-part availability for either model. Specifications do not establish reliability, speed or print quality.
See the CR-10 S5 owner discussion and CR-10 Max owner discussion for questions and owner experiences. Use the 3D printer comparison tool to compare these models' technology parameters.
Sources
- Creality, CR Series 3D Printers Parameter Comparison, dated 2024-12-23. This is the source for the comparison table values and withdrawn label.
- Creality CR-10 Series manual, which includes CR-10 S5 applicability. No additional CR-10 Max claims are inferred from this manual.