Anycubic Photon P1 3D Printer Specifications
Anycubic Photon P1
Printer details
Manufacturer: Anycubic. Technology: Resin.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build width: 223 mm Source
- Build depth: 126 mm Source
- Build height: 230 mm Source
- Machine weight: 13.6 kg Source
- Wi-Fi: Yes Source
- Ethernet: Yes Source
- Compatible slicers: Photon Workshop 4.0; compatible with Chitubox, Lychee and Tango Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.

Overview
The Anycubic Photon P1 is a desktop LCD resin printer with a manufacturer-rated 223 × 126 × 230 mm build envelope, a 10.1-inch 14K monochrome screen and an actively temperature-controlled vat. Its 16.8 × 24.8 μm pixel pitch and advertised layer range describe specifications, not guaranteed finished-part accuracy.
The base printer is a single-material configuration. Anycubic describes its dual-color or dual-material workflow as an optional kit, and its specification table says automatic resin refill is not supported. The printer is a better fit when the heated vat, its nominal build area and assisted workflow suit the buyer’s resin jobs. It is a poor fit when built-in resin refill or large one-piece parts are essential. Current regional bundles may include optional equipment; verify the selected package and plug.
Buying advice
Anycubic’s U.S. product page is the manufacturer buying route. The page presents selectable P1 and bundle options, including an optional dual-material kit, and asks buyers to select the appropriate plug. Treat the destination as a configuration selector; this page makes no price or stock claim.
Resin printing also requires a compatible wash and cure workflow. Anycubic says a cleaning kit and wash-and-cure machine are needed for cleaning and curing printed parts. GoodPrints3D has not hands-on tested the Photon P1.
Accessories and replacement parts
Anycubic’s model-specific accessories collection lists P1 replacement items including resin vat, LCD screen, build plate, NFEP film, AirPure 2.0 and a dual-material assembly. AirPure and the dual-material kit are optional equipment, not standard base-P1 contents. Check the product selector for Photon P1 specifically because the same catalog also serves Photon P1 Max and other models.
The manufacturer’s replacement build-plate page explicitly lists precision-ground and perforated steel plates for Photon P1. Confirm which plate option matches the intended use and recalibrate as directed after replacement.
Reviews and guides
Tom’s Hardware published an independent hands-on Photon P1 review on April 3, 2026. Its reviewer highlighted the heated vat and Wave Release features, while noting that the printer lacks automatic refill and that dual-build-plate slicing was glitchy in their test. These are that publication’s observations, not GoodPrints3D test results or a guarantee for every setup.