Anycubic Photon M3 Plus 3D Printer Specifications

Printer hub

Anycubic Photon M3 Plus

The Photon M3 Plus is a monochrome LCD masked-stereolithography (MSLA) resin printer. Anycubic specifies a 9.25-inch 6K screen, 34 μm XY resolution and a published 197 × 122 × 245 mm X/Y/Z build envelope. The manufacturer also lists an a...

Printer details

Manufacturer: Anycubic. Technology: Resin.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build envelope: Published build envelope: Anycubic Photon M3 Plus standalone printer, UK product listing: 197 × 122 × 245 mm Source
  • Included camera: Yes Source
  • Wi-Fi: Yes Source
  • USB printing: Yes Source
  • Compatible slicers: Anycubic Photon Workshop (manufacturer wiki lists V3.1.4) Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Overview

The Photon M3 Plus is a monochrome LCD masked-stereolithography (MSLA) resin printer. Anycubic specifies a 9.25-inch 6K screen, 34 μm XY resolution and a published 197 × 122 × 245 mm X/Y/Z build envelope. The manufacturer also lists an automatic resin feed module and built-in camera. Its maximum speed of up to 100 mm/hour is a manufacturer rating, not an independently measured result.

A good fit for

  • Large-format resin models within the published 197 × 122 × 245 mm envelope.
  • Users who value a monochrome LCD, Wi-Fi/cloud features and automatic resin feeding.

Keep in mind

  • The 100 mm/hour figure is an advertised maximum; actual speed depends on the resin and print settings.
  • The build platform uses four-point manual leveling. Resin handling, washing and post-curing remain part of the workflow.

Buying advice

The official US Anycubic page is for the exact Photon M3 Plus standalone printer. It was marked sold out when checked on 2026-11-15; this link does not imply current stock or an active checkout.

Anycubic Photon M3 Plus at the official US store

Accessories and replacement parts

Anycubic lists an auto-feed unit in the included parts for this model. Its model wiki provides the manual and Wi-Fi setup guide, plus model-specific replacement instructions. Check exact model compatibility before buying replacement films or other consumables; this packet does not verify a separate accessory bundle.

Photon M3 Plus manual

Photon M3 Plus Wi-Fi connection guide

Reviews and guides

This packet uses manufacturer specifications and support material only; no independent hands-on performance test was reviewed. The 34 μm figure is the manufacturer’s XY resolution specification, not a measured accuracy result.

Anycubic Photon M3 Plus buyer assessment

Anycubic Photon M3 Plus vs Elegoo Saturn 2 comparison