Anycubic Photon M3 Plus buyer assessment: capacity, resin workflow and tradeoffs

Manufacturer image of the Anycubic Photon M3 Plus resin printer with yellow cover

The Anycubic Photon M3 Plus is worth considering if you want an LCD resin printer with room for larger models or batches and value automatic resin feeding. Its 197 × 122 × 245 mm published build envelope, camera and connected features are attractive, but resin handling, manual leveling and consumable maintenance remain part of ownership. We have not tested this printer; this assessment uses manufacturer information and an attributed independent review.

See the Photon M3 Plus printer hub for the reviewed specifications. The exact-model Anycubic product page is useful for product and support information. It showed sold out when checked on November 15, 2026, so check the actual seller and configuration before assuming it can be purchased.

Who is it for?

The build area makes the M3 Plus a candidate for detailed miniatures, busts or multiple parts that fit inside the stated envelope. Its automatic feed can be useful on resin-intensive jobs. It is less compelling if you only print small objects and do not need the extra capacity, or if you cannot provide a suitable workspace for uncured resin and post-processing. A larger build area does not guarantee that any particular part will fit after orientation and supports are added.

Anycubic specifies a 9.25-inch monochrome 6K screen at 5,760 × 3,600 pixels and 34 micrometres XY resolution. That last number is a screen specification, not a measured guarantee of dimensional accuracy. The advertised maximum of 100 mm per hour is a manufacturer ceiling; resin, layer settings and the job affect actual time. Anycubic’s model specifications provide the basis for these figures.

Materials, setup and software

Anycubic identifies 405 nm UV resin for this model. Its model support page lists starting parameters for several resin types, including standard, plant-based, tough and water-wash products. Use settings appropriate to the specific resin and validate them with a calibration print; a listed material is not a promise that every formulation works with the same settings.

The printer uses four-point manual leveling. Follow the model manual and check the plate before the first print. Anycubic lists Photon Workshop, USB transfer, Wi-Fi and cloud functions; its support page links a Wi-Fi guide. Confirm current software and service compatibility before relying on remote features. A built-in camera and auto-feed module do not remove the need to monitor the printer and handle spills safely.

In a 2022 Space.com review, Stewart Rice reported detailed miniature results, but also noisy fans, a punctured vat film in one test and connectivity and software problems in that test. These are observations of one review unit and historical software, not a failure rate or proof of current software behavior.

Safety, maintenance and running costs

Plan for a well-ventilated workspace away from children and pets. Follow the resin manufacturer’s safety data sheet and instructions for protective gloves, eye protection, ventilation, washing and curing. Uncured resin and contaminated cleaning liquid need appropriate handling and disposal under local rules. Water-washable resin still needs responsible waste handling; do not pour contaminated wash water down a drain.

Inspect the vat film and screen for damage or resin residue, clean equipment as directed, and check exact-model compatibility before ordering replacement film or a screen. Budget for resin, cleaning supplies, protective equipment, replacement consumables, electricity and a way to wash and cure parts. Auto-feed reduces manual refilling during a job but does not eliminate these costs or cleaning work.

What else should you consider?

If your parts are small, compare a smaller resin printer against the M3 Plus on usable build area, replacement parts and the space needed for cleaning. If you primarily need larger functional parts and prefer a filament workflow, compare an FFF printer instead, while checking the material and detail requirements of your own project. For a similar-size resin alternative, read our Photon M3 Plus vs Elegoo Saturn 2 comparison. Use the printer comparison tool to check current reviewed models rather than assuming a newer or larger printer is automatically better for your work.

Verdict

Choose the M3 Plus for its stated build space and resin-feed convenience only after checking the exact machine, local support and consumables. Its manufacturer specifications and an independent historical review provide useful context, but neither proves how your prints will turn out. Read the Photon M3 Plus owner discussion for community context and share your own experience there.

Featured image: Anycubic, manufacturer product image.