AnkerMake M5 3D Printer Specifications

Printer hub

AnkerMake M5

The AnkerMake M5 is an FDM filament printer with a 235 × 235 × 250 mm build area. Its official specifications list a 500 mm/s Fast Mode, but using that mode requires the specified firmware and current AnkerMake Studio and app versions; t...

Printer details

Manufacturer: AnkerMake. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build volume: Standard build area: AnkerMake M5: 235 × 235 × 250 mm Source
  • Build width: 235 mm Source
  • Build depth: 235 mm Source
  • Build height: 250 mm Source
  • Maximum hotend temperature: 260 C Source
  • Maximum bed temperature: 100 C Source
  • Manufacturer material guidance: PLA, PETG, TPU, ABS Source
  • Compatible slicers: AnkerMake Studio (macOS, Windows), Simplify3D, Ultimaker Cura, PrusaSlicer Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Overview

The AnkerMake M5 is an FDM filament printer with a 235 × 235 × 250 mm build area. Its official specifications list a 500 mm/s Fast Mode, but using that mode requires the specified firmware and current AnkerMake Studio and app versions; the figure is a manufacturer maximum, not a guaranteed quality speed.

A good fit for

  • Remote print monitoring through the built-in camera and AnkerMake app.
  • A mid-sized 235 × 235 × 250 mm build area and 7 × 7 automatic leveling.

Keep in mind

  • Fast Mode depends on firmware V2.0.93_2.0.72 or newer and AnkerMake Studio V0.9.22_3 and app V1.0.7 or newer.
  • The listed 500 mm/s is a manufacturer mode limit, not an independently measured quality result.

Buying advice

3B3D Printing Solutions lists the exact AnkerMake M5 standalone printer for the UK and provides a direct product checkout route. The listing does not establish current stock or condition; confirm stock, electrical configuration, delivery region, and support with the seller before purchase.

AnkerMake M5 at 3B3D Printing Solutions (UK)

Accessories and replacement parts

For setup, operation, and troubleshooting, use the exact-model support material. No replacement part or accessory offer is included here without a verified exact-fit destination; check regional availability with eufyMake support before relying on a spare.

AnkerMake M5 quick start guide

Reviews and guides

Read the GoodPrints3D M5 review for an attributed discussion of the printer’s strengths, limits, software dependencies, and used-buying checks. It discloses that GoodPrints did not hands-on test the M5. The comparison with the full-size Bambu Lab A1 covers a current open-frame alternative.

AnkerMake M5 review

AnkerMake M5 vs Bambu Lab A1 comparison

AnkerMake Studio workflow guide