AnkerMake M5 vs Bambu Lab A1: Which Open-Frame Printer Makes Sense Now?

GoodPrints3D logo

Short answer: Choose the Bambu Lab A1 if you are buying a new open-frame printer and want a larger build area, a current multicolor route through AMS Lite, and an active product ecosystem. Consider an AnkerMake M5 only as a used machine at a substantial discount, after a live inspection, if its touchscreen, camera, and 235 × 235 × 250 mm workspace fit your needs. Anker confirmed that M5 sales were paused indefinitely, so parts and long-term support remain uncertain.

Research disclosure: GoodPrints did not hands-on test these printers for this comparison. Specifications are attributed to each manufacturer. Lifecycle reporting is attributed to The Verge. We do not treat advertised maximum speed as a measured result.

The quick decision

  • Pick the Bambu Lab A1 for a new purchase: its 256 mm cube is larger on every axis than the M5's 235 × 235 × 250 mm space, and AMS Lite provides an optional multicolor workflow. Confirm the exact package and included accessories before ordering.
  • Consider the M5 used: its built-in 4.3-inch touchscreen, camera and familiar open-frame layout may suit someone comfortable evaluating a second-hand machine. Its sales pause means the buyer should assume repair and parts availability may be difficult to predict.
  • Choose neither for routine enclosed-material work: both are open-frame machines. The A1's higher maximum hotend temperature does not make it an enclosed printer, and Bambu does not recommend ABS, ASA, PC, PA, PET, or fiber-reinforced materials for the A1 in its published material table.

At a glance

Decision point AnkerMake M5 Bambu Lab A1
Type Open-frame FDM, single nozzle Open-frame FDM, single nozzle
Build volume 235 × 235 × 250 mm 256 × 256 × 256 mm
Maximum hotend temperature 260°C 300°C
Maximum bed temperature 100°C 100°C
Multicolor path No equivalent current multicolor system is established by the sources used here Optional AMS Lite; package may vary
Availability context Anker confirmed sales stopped indefinitely in July 2025; current parts availability is uncertain Current model information is published by Bambu Lab; check current regional offer and support terms before purchase

Build volumes and temperature limits are manufacturer specifications, not usable-area measurements from our own test. The published M5 material list includes PLA, PETG, TPU, and ABS. Bambu lists PLA, PETG, TPU, and PVA as ideal for the A1 and marks several engineering materials as not recommended. Filament formulations and printer setup still matter.

Build space: the A1 has more room

The A1's 256 × 256 × 256 mm build volume is larger than the M5's 235 × 235 × 250 mm specification. That gives the A1 extra width, depth, and height for parts that nearly fill the M5's stated space. If your models already fit comfortably on the M5, the difference may not change your day-to-day work. If large flat parts or taller single pieces are a recurring constraint, measure the actual model and leave room for brim, supports, and printer-specific limits before deciding.

Materials: compare the full setup, not one temperature number

The M5's published maximum hotend temperature is 260°C and its maximum bed temperature is 100°C. Bambu lists 300°C and 100°C respectively for the A1. Those limits describe the machines, but do not by themselves establish material suitability. The M5 is open-frame, and Bambu's own A1 material table does not recommend ABS, ASA, PC, PA, PET, or fiber-reinforced materials. For routine PLA, PETG, and TPU work, either printer's published compatibility needs to be checked against the specific filament and profile. Do not buy the A1 solely because its hotend temperature is higher.

Color printing and everyday workflow

The A1 has an optional multicolor route through Bambu's AMS Lite. It adds equipment, setup, and filament handling to the purchase, so compare the exact A1 package rather than assuming AMS Lite is included. We found no basis in the sources for treating the M5 as an equivalent multicolor system. The M5 instead emphasizes its own touchscreen, camera, app, and connected monitoring features. Those can remain useful on a working used printer, but account transfer, firmware, application access, and replacement parts should all be checked before money changes hands.

Speed claims need context

The M5 advertises a Fast Mode up to 500 mm/s, and Bambu lists a maximum A1 toolhead speed of 500 mm/s. These figures do not mean the printers deliver the same print time, surface finish, or reliability on a real model. Slicer settings, material flow, geometry, acceleration, and quality targets all change the result. We have not run a matched print test, so there is no measured winner here. Use the included profiles as a starting point and judge with the parts you actually make.

Ownership risk changes the M5 calculation

Anker confirmed to The Verge that M5 sales stopped indefinitely in July 2025. The official M5 product and specification page remains available as reference material, but that does not confirm current stock, parts supply, or future software support. A used M5 can still be worth considering if it is inexpensive and passes a thorough test, but price the risk of sourcing a hotend, build plate, fans, cables, and other model-specific parts into the decision. The A1 is the more straightforward choice for a new purchase when you want a current product with a published manufacturer workflow; verify regional availability, warranty, and support terms directly before buying.

Which one should you choose?

Choose the Bambu Lab A1 if you are shopping for a new open-frame printer, want its larger 256 mm cube, or may use AMS Lite for multicolor prints. It is the simpler default for a buyer who wants to start with a current platform rather than evaluate used hardware.

Choose an AnkerMake M5 only as a careful used buy if a tested unit is priced low enough to absorb possible repairs, its built-in screen and camera matter to you, and you can verify account transfer and operation before purchase. Do not value it as though new sales or parts availability were assured.

Choose an enclosed printer instead if your regular work depends on a controlled chamber or materials that these open-frame models do not make a straightforward choice for.

Related reading and owner resources

Image credit: GoodPrints3D site logo

Sources