Sinterit Lisa X vs Formlabs Fuse 1+ 30W: SLS buyer comparison

The Sinterit Lisa X and Formlabs Fuse 1+ 30W are selective laser sintering printers for teams prepared to manage a polymer-powder workflow. Start with the part's dimensions and exact material, then compare the complete installed cell. Lisa X offers more stated height, while the Fuse has a wider first listed axis; neither envelope is larger in every direction. This comparison uses manufacturer specifications and is not a GoodPrints hands-on test.

Explore the Lisa X printer hub and buyer guide, or the Fuse 1+ 30W hub and buyer guide.

Specifications at a glance

Sinterit Lisa X: Selective laser sintering. Build volume: 130 × 180 × 330 mm for PA/PP; 130 × 180 × 340 mm for TPU-based and flexible materials. Laser: 30 W IR fiber-coupled diode.

Formlabs Fuse 1+ 30W: Selective laser sintering. Build volume: 165 × 165 × 300 mm. Laser: 30 W ytterbium fiber.

Sources: Sinterit Lisa X specification and Formlabs Fuse Series specifications. These are nominal manufacturer figures, not measured yield or performance.

Build volume and part fit

Sinterit lists a 330 mm maximum height for PA/PP and 340 mm for TPU-based and flexible materials; the larger height does not apply to every powder. Formlabs lists 300 mm height for the Fuse. The Fuse's 165 mm first dimension exceeds Lisa X's 130 mm, while Lisa X's 180 mm second dimension exceeds the Fuse's 165 mm. Orientation can change whether a particular part fits. Check clearances, nesting and the exact material with each supplier; a rectangular envelope does not guarantee usable yield, throughput or part quality.

Materials and software

Choose the exact powder for the finished part, not just a material family. Sinterit's specification lists the PA12 Industrial profile with standard Sinterit Studio and all available profiles, third-party materials and open parameters with Studio Advanced. Confirm the edition, profile and terms included in the proposed configuration. The Fuse materials guide explains the Formlabs material route and its limits. Ask each supplier for current material data, processing instructions and representative parts. Similar powder names do not make settings or finished properties interchangeable.

Workflow and installation

Both systems require planning for powder storage, preparation, cooling, unpacking, recovery and finishing. Formlabs lists a modular build chamber for the Fuse 1+ 30W; check how many chambers and what recovery equipment are included in the quote. Sinterit's specification lists built-in inert-gas control for Lisa X. Confirm the external supply, atmosphere and equipment needed for the exact material and installation. Do not assume a gas requirement applies to every powder.

Compare complete installed quotes, training, service, software, consumables, labor and expected utilization. Obtain current site-preparation instructions and safety data sheets, and review ventilation, powder exposure, electrical service and fire protection with qualified personnel. No current price, stock or measured production cost is asserted here.

Which should you consider?

Consider Lisa X when its material-specific height and the intended Sinterit material and software route match the work. Consider the Fuse 1+ 30W when the part fits its stated envelope and the Formlabs material and modular-chamber workflow suit the application. Ask both suppliers for complete current configurations, local support and a representative finished build against your acceptance criteria. A qualified printing service can be a useful first step if demand or facility readiness is uncertain.