QIDI Max4 vs Plus4: Which Large Enclosed Printer Fits Your Work?
Choose the standard QIDI Max4 if your recurring parts or batch layouts need more room than the Plus4 offers and you can accommodate a larger machine. Consider keeping or buying a standalone Plus4 when your actual jobs fit its smaller envelope and the condition, warranty and support of the specific machine are acceptable. This is a source-based buying assessment, not a hands-on test.
Compare the exact configurations on QIDI's Max4 product page and US Plus4 product page; select the standalone printer rather than assuming a Combo or accessory is included. Availability and terms can change.
Max4 vs Plus4 at a glance
| Decision point | Max4 standard | Plus4 standalone |
|---|---|---|
| Nominal print envelope, W × D × H | 390 × 390 × 340 mm | 305 × 305 × 280 mm |
| Heated chamber | QIDI advertises third-generation active heating up to 65°C | QIDI advertises second-generation active heating up to 65°C; confirm the revision and applicable specifications |
| Lifecycle evidence | Listed on QIDI's US product page | QIDI's global page says production has ended; regional listings and seller stock may differ |
Sources: QIDI Max4, Plus4 technical specifications, and QIDI global Plus4 page. The advertised chamber ceilings are not material settings or a guarantee of a particular part's outcome. QIDI's US Plus4 page also contains conflicting temperature figures, so check the documentation for the exact machine and revision.
Measure the work before choosing the envelope
Max4 adds a nominal 85 mm in width and depth and 60 mm in height. That can matter for a housing that must stay in one piece or for arranging several smaller parts in one job. It does not mean every object of those dimensions will print: orientation, supports, brim, purge structures, clearance and shrinkage all affect usable space.
Collect representative files, orient them as you would print them, add required supports and slice with the current profile for each exact machine. Include any purge or adhesion features and inspect warnings. If only an occasional part exceeds the Plus4's practical space, consider splitting and joining it where the application permits, or outsourcing that job. Check the joint and finished part for the loads and tolerances that matter to you.
What Plus4's lifecycle means for a buyer
QIDI's global page describes Plus4 as discontinued and identifies Plus5 as its direct successor. Regional listings and seller stock can differ; the production notice does not establish stock or future support for a particular seller.
For a new, remaining-stock, open-box or used machine, ask the seller to confirm the exact model, hardware revision, condition, included accessories, warranty, returns and parts or service route in your region. For an existing Plus4, weigh the value of your established setup against the capacity you actually need. If current same-brand support is the main question, read our Plus4 versus Plus5 buyer guide.
Materials and setup need a grade-specific check
QIDI names PLA, ABS, PETG and TPU among materials for both models. Its Plus4 specification also lists other families, while Max4 source lists differ in breadth. A family name does not establish that every formulation or feed path works. Check current exact-model instructions and profiles, the filament maker's settings, the plate and the installed nozzle before buying a particular spool.
For ABS or other warp-prone materials, plan the chamber process, adhesion and cooldown around the actual part and follow the material's ventilation and safety guidance. Flexible TPU needs a suitable grade and feed path. Filled materials can wear components: confirm nozzle material and size, drying and replacement guidance for the exact grade. A heated chamber or a high nozzle limit alone does not qualify a material or a finished part. See our Max4 materials guide for the documented families and their limits.
When setting up a machine, follow the applicable QIDI instructions, use the correct regional electrical supply, and select the exact printer and material profile in the slicer. QIDI lists QIDI Studio and compatible third-party slicers for Plus4; verify current software and firmware support for the exact machine. Slice a representative job and check the feed path, plate and first layer. Existing profiles may need qualification again after a machine, material or hardware change.
Compare the whole setup and ongoing work
- Configuration and delivered cost: compare the same region, printer option, freight, taxes, return terms and warranty. QIDI Box and other extras are separate configuration questions; do not assume a Combo or Polar Cooler is included with a standard machine.
- Space: measure the installed machine and allow access for doors, cables, filament and maintenance. Verify clearance and power requirements in the applicable manual rather than treating the print envelope as the external footprint.
- Maintenance: check availability and fit of model-specific nozzles, plates, filters and other wear parts, and follow the maker's cleaning and replacement schedule. Do not assume parts interchange between models.
- Running exposure: consider electricity, filament conditioning, consumables and the time and material at risk if a large job fails. These depend on the job and local costs; this comparison does not estimate them.
Which should you choose?
- Choose Max4 when a recurring one-piece part or realistic batch layout needs its larger envelope and the installed space and whole-job costs fit your workflow.
- Keep or consider Plus4 when representative jobs fit, and the specific machine's condition, configuration and support are acceptable despite the production status.
- Consider Plus5 or an outside service when Plus4's lifecycle or an occasional oversized job is the real problem. Compare the actual requirement and support terms before changing equipment.
There are no comparative print-quality, speed, reliability or operating-cost test results in this assessment. Check current regional listings, documentation and a representative sliced job before deciding.
For a closer look at suitability and ownership, read our QIDI Max4 buyer assessment and explore the Max4 printer hub. Visit the QIDI Max4 discussion to follow or share owner experiences.
Featured image: QIDI Max4 product image courtesy of QIDI.