Craftbot Plus vs. Original Prusa MK4S: Compare Build Space and Ownership Needs

GoodPrints3D logo

Craftbot Plus vs. Original Prusa MK4S: Compare Build Space and Ownership Needs

Both are FFF filament printers, but the Craftbot Plus build space is 250 × 200 × 200 mm, according to Craftbot’s maximum-size guidance, while Prusa lists 250 × 210 × 220 mm for the Original Prusa MK4S on its MK4S product page. The difference is modest on paper: check your largest part in the intended orientation, then compare the exact machine, setup and support that you can actually obtain.

The Craftbot Plus is a legacy model. Craftbot’s published specification groups the Plus with the Plus PRO, so confirm revision-specific details before relying on listed features. Prusa’s MK4S product page describes its own current configurations. Neither manufacturer specification is a hands-on test or a guarantee that a particular part will print successfully.

At a glance

Specification Craftbot Plus Original Prusa MK4S
Technology FFF, as listed by Craftbot FFF filament printer
Build volume 250 × 200 × 200 mm 250 × 210 × 220 mm
Extrusion Direct extruder, on the grouped Plus (PRO) specification Nextruder direct drive, on Prusa’s product specification
Bed and calibration Heated removable aluminium or glass plate; menu-assisted manual calibration, per Craftbot’s grouped specification See the exact MK4S configuration and current manufacturer documentation
Availability and offer Not verified for a particular unit Check current regional configurations and terms with Prusa

Where the difference matters

The MK4S has 10 mm more listed space in Y and 20 mm more in Z, with the same listed X dimension. That can matter for a design close to the Craftbot Plus envelope, but it does not establish print quality, speed or usable clearance for every setup. Slice representative parts using the exact model profiles and account for brim, supports and orientation.

The more consequential question may be what you can verify. For a Craftbot Plus, check the label, revision, included plate and accessories, firmware, spare parts and support path. The manufacturer page groups Plus and Plus PRO, and optional accessories should not be assumed to come with a used unit. For the MK4S, compare the kit or assembled configuration, included equipment and current regional terms. This article does not establish a particular sale, price, stock level or machine condition.

Which one should you consider?

Consider the Craftbot Plus if your parts fit its 250 × 200 × 200 mm envelope and you can confirm the exact machine and support situation. Consider the Original Prusa MK4S if its slightly larger listed Y and Z space, documented configuration options and current availability fit your requirements. If you need a particular material, enclosure or accessory, verify the exact setup with the manufacturer before choosing.

For model-specific context, read the Craftbot Plus printer hub, the Craftbot Plus buyer guide and the Original Prusa MK4S review. The Craftbot Plus owner discussion is a place to compare owner notes. You can also use the 3D printer comparison tool to compare selected model parameters.

Image credit: GoodPrints3D site logo. It is site artwork, not an image of either printer.