Craftbot Plus Buyer Guide: Build Size, Setup and What to Check
The Craftbot Plus is worth considering when your parts fit its manufacturer-stated 250 × 200 × 200 mm build space and you are comfortable checking the exact machine, revision, and support path before buying. It is an FFF filament printer, but the available manufacturer specifications group the Plus with the Plus Pro, so confirm revision-specific details rather than assuming every listed accessory or feature applies to every Plus.
Comparing the Craftbot Plus with the Plus Pro? See our Craftbot Plus vs Plus Pro comparison, which explains what Craftbot’s grouped specifications do and do not establish.
Start with the Craftbot Plus printer hub for the reviewed model overview. For setup and ownership context, see the Craftbot Plus owner discussion.
Does the build space fit your parts?
Craftbot states that the Craftbot Plus can print objects up to 250 × 200 × 200 mm, roughly 10 × 8 × 8 inches; see the manufacturer build-size information. Measure the part in its intended orientation and leave room for any brim, supports, or clearance your slicer setup requires. If a design is larger, the manufacturer says it can be divided into pieces and assembled; that adds planning and finishing work and is not the same as printing the object in one piece.
What the manufacturer lists
Craftbot’s Plus (PRO) specification page describes an FFF machine with direct-drive extrusion, a heated removable aluminium or glass plate, 1.75 mm filament, and a default 0.4 mm nozzle. It lists menu-assisted manual plate calibration and CraftWare/Craftware Pro software. Because the page groups Plus and Plus Pro, treat it as a starting point and verify the exact printer revision and included equipment with the seller or manufacturer.
The same grouped page lists optional PET-G door and ventilated dome accessories. Do not assume either is included or compatible with a particular used machine. Confirm the accessory part number and fit for the exact revision before ordering.
What to verify before buying
- Confirm the model and revision from the machine label and seller documentation.
- Ask what is included, including the build plate, power cable, tools, and any enclosure parts; the contents of a particular offer are unknown until verified.
- For a used unit, check its working condition and ask for evidence of operation. This guide does not report hands-on testing.
- Check that the current manual, firmware for the exact revision, replacement parts, and support route are available to you before committing. The manufacturer separates Plus and Plus Pro firmware information, so do not install firmware based on the name alone.
- Confirm the delivered printer’s usable space and accessories rather than relying on a listing title or a photo.
Current new-unit availability, a verified retailer offer, and the condition or bundle of any specific machine were not established for this guide. Compare the exact offer and support situation before deciding.
Who should consider it?
The Craftbot Plus may suit a buyer whose regular parts fit within 250 × 200 × 200 mm, who wants an FFF filament workflow, and who can verify the machine and revision-specific support before purchase. Look elsewhere if your recurring parts exceed that envelope in one piece or if you need a confirmed current new-unit offer, a specific enclosure configuration, or verified support for a material or accessory that the available grouped specifications do not establish for your exact machine.
For the reviewed model facts, continue to the Craftbot Plus hub. To compare notes and questions with owners, visit the Craftbot Plus discussion. For a side-by-side look at listed dimensions and ownership checks, read our Craftbot Plus vs. Original Prusa MK4S comparison.
Image credit: GoodPrints3D site logo. The logo is used as site artwork and does not depict the Craftbot Plus.