DISCOVERED ON SKETCHFAB

Cyclist - 3d printable

Created by Andy Woodhead (opens in a new tab)

CC BY 4.0126 Sketchfab likes
View model on Sketchfab (opens in a new tab)

Get files, available formats, and printing instructions from the original listing.

License declared by creator
CC BY 4.0 (opens in a new tab)
Published on Sketchfab
May 9, 2020
Listing checked
Nov 17, 2026
Printing suitability
Creator tagged; unverified

GP3D review

GoodPrints3DMODEL PICKRECOMMENDED

Source-based · Not test-printed by GP3D

Recommended for experienced resin hobbyists. GP3D assessmentThe creator identifies support removal as the main risk, making this a reasonable display project for makers comfortable with delicate resin cleanup. [1]

GP3D assessmentA more demanding display project for a resin-printing workflow. The clearest risk is cleanup: the creator warns that removing supports can accidentally cut into the bicycle. We would choose this for careful finishing rather than a first miniature. [1]

Print difficulty: Challenging. GP3D assessmentOur difficulty assessment comes from the creator’s explicit warning about support removal near the bicycle, rather than a GP3D test print. [1]

  • Creator informationThe creator describes an STL sized for an Anycubic Photon or a similar resin printer. Check the dimensions in your slicer before changing the scale. [1]
  • GP3D assessmentA supported Chitubox file and a separate cobblestone base are linked from the listing. Confirm those downloads and inspect the supports for your own setup before committing to the print. [1]
  • Community reportA commenter said they planned to try a Prusa MK3S. That comment does not report a successful FDM print, so it should not be treated as proof of FDM suitability. [2]

18 public comments checked. Checked Nov 17, 2026.

Sources checked
  1. Creator’s description (opens in a new tab)
  2. Public comment by slapshot (opens in a new tab) · Jun 26, 2020

FROM THE MAKER

About this model.

A high-poly Zbrush model ready for 3d printing - I know it doesn't look as if it will print, but it will - see pictures below. I have based the model on pictures of the Tour de France showing one of the sprinters going over the cobblestones. When you download this model you will get an STL file sized to fit the Anycubic Photon or similar spec resin printer. The trickiest part of the process is removing the supports without cutting through part of the bicycle! I have also provided a link below to my Chitubox file for this model with all of the supports I put in place - download main model first please. Cobblestone base for the cyclist model: https://www.dropbox.com/s/jmq1c7krpmbbd4e/Base_cyclist_02.stl?dl=0 Chitubox file of cyclist with supports: https://www.dropbox.com/s/2ry30wzjknlmwqg/Cyclist_02%20Chitubox.chitubox?dl=0