DISCOVERED ON SKETCHFAB
3d Printable Pneumatic-Engined Toy Car
Created by Slava Z. (opens in a new tab)
Get files, available formats, and printing instructions from the original listing.
- License declared by creator
- CC BY 4.0 (opens in a new tab)
- Published on Sketchfab
- May 5, 2019
- Listing checked
- Nov 17, 2026
- Printing suitability
- Creator tagged; unverified
GP3D review
Source-based · Not test-printed by GP3D
GP3D assessmentA good candidate for someone who wants a working mechanical project and enjoys assembly. The pneumatic engine and steering are the appeal, but the hardware list makes this a larger commitment than a simple toy-car print. [1]
Print difficulty: Not established. GP3D assessmentAssembly is clearly involved. The description does not establish a layer height, orientation or support strategy, so we cannot confidently rate the printing itself. [1]
- Creator informationBudget for the non-printed parts first: the creator lists a 623ZZ bearing, tubing, two 2 ml syringes, a balloon and numerous M3 fasteners. [1]
- GP3D assessmentThe creator links the STL package outside Sketchfab. Check that the linked package is accessible and complete before buying hardware; we have not verified that download. [1]
- Community reportOne commenter described a plan to print the car after learning printer setup. That post records an intention, rather than a completed build or a reliable difficulty test. [2]
7 public comments checked. Checked Nov 17, 2026.
Sources checked
FROM THE MAKER
About this model.
Here you can see it in action: https://youtu.be/9Cofmy4bZX4 Uh...didn't find a way to attach a package with .stl files. Here they are: https://drive.google.com/open?id=1hNs4ZOr_H-nXIlVeMiUy7iY9UJ5GkodB Made with Fusion 360. A toy car with double-acting 1-cylinder compressed air engine (like the steam locomotives have). Has steering, which even works. I call it "vapemobile" because of the remote shape). Apart from these printed parts, you'll need some extra ones to assemble it: * 623ZZ bearing (4x10mm, 3mm hole) (may poorly work without it) * Piece of 1.75mm filament * Rubber band * Thin plastic bag * 6mm silicon pipe (can be found in any aquarium shop) * 4mm pipe from intravenous dropper (or any that you could pull onto the syringe end) * Two 2ml syringes * 8mm piece of 4mm PTFE tube (optional) * Air balloon * Bolts: M3x6 x8, M3x8 x8, M3x10 x3, M3x12 x5, M3x14, M3x25, M3x50 * M3 washers x10 * M3 nuts x30




