Polymaker Panchroma Satin PLA: colors, sizes and print guidance

Compare 10 reviewed colors of Polymaker Panchroma Satin PLA, available sizes and documented manufacturer guidance.

Compare colors and available sizes

Manufacturer guidance

Property Reviewed value Evidence
Material PLA
Source & conditionsManufacturer source

Manufacturer product identity and description. For breakaway supports, polymer composition remains undisclosed; the family label describes the support category.

Finish Satin
Source & conditionsManufacturer source

Manufacturer explicitly names this finish or appearance category in the product name. Not a measured surface property.

Minimum nozzle temperature 190 °C
Source & conditionsManufacturer source

Consolidated reseller TDS v2.1, Satin finish family, recommended printing settings and data table. Speed guidance is an upper limit based on 0.4 mm line width and 0.2 mm layer height. Physical formulation properties are not inferred for mixed or gradient effects.

Maximum nozzle temperature 230 °C
Source & conditionsManufacturer source

Consolidated reseller TDS v2.1, Satin finish family, recommended printing settings and data table. Speed guidance is an upper limit based on 0.4 mm line width and 0.2 mm layer height. Physical formulation properties are not inferred for mixed or gradient effects.

Minimum bed temperature 25 °C
Source & conditionsManufacturer source

Consolidated reseller TDS v2.1, Satin finish family, recommended printing settings and data table. Speed guidance is an upper limit based on 0.4 mm line width and 0.2 mm layer height. Physical formulation properties are not inferred for mixed or gradient effects.

Maximum bed temperature 60 °C
Source & conditionsManufacturer source

Consolidated reseller TDS v2.1, Satin finish family, recommended printing settings and data table. Speed guidance is an upper limit based on 0.4 mm line width and 0.2 mm layer height. Physical formulation properties are not inferred for mixed or gradient effects.

Drying temperature 55 °C
Source & conditionsManufacturer source

Consolidated reseller TDS v2.1, Satin finish family, recommended printing settings and data table. Speed guidance is an upper limit based on 0.4 mm line width and 0.2 mm layer height. Physical formulation properties are not inferred for mixed or gradient effects.

Drying duration 6 hours
Source & conditionsManufacturer source

Consolidated reseller TDS v2.1, Satin finish family, recommended printing settings and data table. Speed guidance is an upper limit based on 0.4 mm line width and 0.2 mm layer height. Physical formulation properties are not inferred for mixed or gradient effects.

Enclosure guidance not needed
Source & conditionsManufacturer source

Manufacturer product page, Technical Specifications. Product-specific guidance; not independent testing.

Reviewed color options

Color Approx. HEX Available sizes
Satin Black Not verified 1.75 mm · 1 kg · Spool · new-packaging; 1.75 mm · 1 kg · Spool · old-packaging; 1.75 mm · 3 kg · Spool · old-packaging
Satin Blue #0162A6 1.75 mm · 1 kg · Spool · new-packaging; 1.75 mm · 1 kg · Spool · old-packaging
Satin Green #5EAB71 1.75 mm · 1 kg · Spool · new-packaging; 1.75 mm · 1 kg · Spool · old-packaging
Satin Grey #797E89 1.75 mm · 1 kg · Spool · new-packaging; 1.75 mm · 1 kg · Spool · old-packaging
Satin Orange #FE9217 1.75 mm · 1 kg · Spool · new-packaging; 1.75 mm · 1 kg · Spool · old-packaging
Satin Polymaker Teal #61BBC1 1.75 mm · 1 kg · Spool · new-packaging; 1.75 mm · 1 kg · Spool · old-packaging
Satin Purple #9272C1 1.75 mm · 1 kg · Spool · new-packaging; 1.75 mm · 1 kg · Spool · old-packaging
Satin Red #DA1521 1.75 mm · 1 kg · Spool · new-packaging; 1.75 mm · 1 kg · Spool · old-packaging
Satin White #F5F0EC 1.75 mm · 1 kg · Spool · new-packaging; 1.75 mm · 1 kg · Spool · old-packaging
Satin Yellow #F4C131 1.75 mm · 1 kg · Spool · new-packaging; 1.75 mm · 1 kg · Spool · old-packaging

These pages reflect selected, independently reviewed catalog evidence. They are not hands-on test results. Missing facts remain unverified. Manufacturer recommendations can vary by machine and application.