Polymaker PolySonic PLA: colors, sizes and print guidance
Compare 10 reviewed colors of Polymaker PolySonic PLA, available sizes and documented manufacturer guidance.
Compare colors and available sizes
Manufacturer guidance
| Property | Reviewed value | Evidence |
|---|---|---|
| Material | PLA | Source & conditionsManufacturer sourceManufacturer product identity and description. For breakaway supports, polymer composition remains undisclosed; the family label describes the support category. |
| Minimum nozzle temperature | 210.0 °C | Source & conditionsManufacturer sourceManufacturer product page, Technical Specifications. Product-specific guidance; not independent testing. |
| Maximum nozzle temperature | 230.0 °C | Source & conditionsManufacturer sourceManufacturer product page, Technical Specifications. Product-specific guidance; not independent testing. |
| Minimum bed temperature | 25.0 °C | Source & conditionsManufacturer sourceManufacturer product page, Technical Specifications. Product-specific guidance; not independent testing. |
| Maximum bed temperature | 60.0 °C | Source & conditionsManufacturer sourceManufacturer product page, Technical Specifications. Product-specific guidance; not independent testing. |
| Drying temperature | 55.0 °C | Source & conditionsManufacturer sourceManufacturer product page, Technical Specifications. Product-specific guidance; not independent testing. |
| Drying duration | 6.0 hours | Source & conditionsManufacturer sourceManufacturer product page, Technical Specifications. Product-specific guidance; not independent testing. |
| Density | 1.23 g/cm3 | Source & conditionsManufacturer sourceReseller hub technical sheet TDS_PolySonic PLA_V6.0_2026-06-08_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Enclosure guidance | not needed | Source & conditionsManufacturer sourceManufacturer product page, Technical Specifications. Product-specific guidance; not independent testing. |
Reviewed color options
| Color | Approx. HEX | Available sizes |
|---|---|---|
| Black | #0C0E0C | 1.75 mm · 1 kg · Spool |
| Blue | #00307E | 1.75 mm · 1 kg · Spool |
| Green | #2D9E59 | 1.75 mm · 1 kg · Spool |
| Grey | #73767D | 1.75 mm · 1 kg · Spool |
| Orange | #F97429 | 1.75 mm · 1 kg · Spool |
| Polymaker Teal | #50DAE4 | 1.75 mm · 1 kg · Spool |
| Purple | #6C5BB1 | 1.75 mm · 1 kg · Spool |
| Red | #E62216 | 1.75 mm · 1 kg · Spool |
| White | #E2DEDB | 1.75 mm · 1 kg · Spool |
| Yellow | #F4C032 | 1.75 mm · 1 kg · Spool |
These pages reflect selected, independently reviewed catalog evidence. They are not hands-on test results. Missing facts remain unverified. Manufacturer recommendations can vary by machine and application.