Polymaker PolyLite Translucent PETG: colors, sizes and print guidance
Compare 4 reviewed colors of Polymaker PolyLite Translucent PETG, available sizes and documented manufacturer guidance.
Compare colors and available sizes
Manufacturer guidance
| Property | Reviewed value | Evidence |
|---|---|---|
| Material | PETG | Source & conditionsManufacturer sourceManufacturer product identity and description. For breakaway supports, polymer composition remains undisclosed; the family label describes the support category. |
| Finish | Translucent | Source & conditionsManufacturer sourceManufacturer explicitly names this finish or appearance category in the product name. Not a measured surface property. |
| Minimum nozzle temperature | 230.0 °C | Source & conditionsManufacturer sourceReseller hub technical sheet TDS_Polymaker_PolyLite PETG_V6.0_2026-06-09_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Maximum nozzle temperature | 260.0 °C | Source & conditionsManufacturer sourceReseller hub technical sheet TDS_Polymaker_PolyLite PETG_V6.0_2026-06-09_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Minimum bed temperature | 70.0 °C | Source & conditionsManufacturer sourceReseller hub technical sheet TDS_Polymaker_PolyLite PETG_V6.0_2026-06-09_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Maximum bed temperature | 80.0 °C | Source & conditionsManufacturer sourceReseller hub technical sheet TDS_Polymaker_PolyLite PETG_V6.0_2026-06-09_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Density | 1.25 g/cm3 | Source & conditionsManufacturer sourceReseller hub technical sheet TDS_Polymaker_PolyLite PETG_V6.0_2026-06-09_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
Reviewed color options
| Color | Approx. HEX | Available sizes |
|---|---|---|
| Clear | #DBD5D6 | 1.75 mm · 1 kg · Spool; 1.75 mm · 3 kg · Spool; 2.85 mm · 1 kg · Spool |
| Translucent Blue | #01062F | 1.75 mm · 1 kg · Spool |
| Translucent Green | #005F2F | 1.75 mm · 1 kg · Spool |
| Translucent Red | #BE0017 | 1.75 mm · 1 kg · Spool |
These pages reflect selected, independently reviewed catalog evidence. They are not hands-on test results. Missing facts remain unverified. Manufacturer recommendations can vary by machine and application.