Polymaker PolyLite LW-PLA: colors, sizes and print guidance
Compare 8 reviewed colors of Polymaker PolyLite LW-PLA, available sizes and documented manufacturer guidance.
Compare colors and available sizes
Manufacturer guidance
| Property | Reviewed value | Evidence |
|---|---|---|
| Material | PLA | Source & conditionsManufacturer sourceManufacturer product identity and description. For breakaway supports, polymer composition remains undisclosed; the family label describes the support category. |
| Minimum nozzle temperature | 190.0 °C | Source & conditionsManufacturer sourceReseller hub technical sheet TDS_PolyLite_LW-PLA_v7.0_2026-04-09. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Maximum nozzle temperature | 210.0 °C | Source & conditionsManufacturer sourceReseller hub technical sheet TDS_PolyLite_LW-PLA_v7.0_2026-04-09. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Minimum bed temperature | 25.0 °C | Source & conditionsManufacturer sourceReseller hub technical sheet TDS_PolyLite_LW-PLA_v7.0_2026-04-09. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Maximum bed temperature | 60.0 °C | Source & conditionsManufacturer sourceReseller hub technical sheet TDS_PolyLite_LW-PLA_v7.0_2026-04-09. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Drying temperature | 55.0 °C | Source & conditionsManufacturer sourceReseller hub technical sheet TDS_PolyLite_LW-PLA_v7.0_2026-04-09. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Drying duration | 6.0 hours | Source & conditionsManufacturer sourceReseller hub technical sheet TDS_PolyLite_LW-PLA_v7.0_2026-04-09. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Density | 0.9 g/cm3 | Source & conditionsManufacturer sourceReseller hub technical sheet TDS_PolyLite_LW-PLA_v7.0_2026-04-09. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Enclosure guidance | not needed | Source & conditionsManufacturer sourceReseller hub technical sheet TDS_PolyLite_LW-PLA_v7.0_2026-04-09. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
Reviewed color options
| Color | Approx. HEX | Available sizes |
|---|---|---|
| Black | #2F2E30 | 1.75 mm · 0.8 kg · Spool |
| Bright Green | #BDD901 | 1.75 mm · 0.8 kg · Spool |
| Bright Orange | #F07806 | 1.75 mm · 0.8 kg · Spool |
| Bright Red | #D6001C | 1.75 mm · 0.8 kg · Spool |
| Bright Yellow | #F6BD01 | 1.75 mm · 0.8 kg · Spool |
| Grey | #94918D | 1.75 mm · 0.8 kg · Spool |
| White | #EDD7BF | 1.75 mm · 0.8 kg · Spool |
| Wood | #A8754B | 1.75 mm · 0.8 kg · Spool |
These pages reflect selected, independently reviewed catalog evidence. They are not hands-on test results. Missing facts remain unverified. Manufacturer recommendations can vary by machine and application.