Polymaker PolyLite Metallic ABS: colors, sizes and print guidance
Compare 2 reviewed colors of Polymaker PolyLite Metallic ABS, available sizes and documented manufacturer guidance.
Compare colors and available sizes
Manufacturer guidance
| Property | Reviewed value | Evidence |
|---|---|---|
| Material | ABS | Source & conditionsManufacturer sourceManufacturer product identity and description. For breakaway supports, polymer composition remains undisclosed; the family label describes the support category. |
| Finish | Metallic | Source & conditionsManufacturer sourceManufacturer explicitly names this finish or appearance category in the product name. Not a measured surface property. |
| Density | 1.04 g/cm3 | Source & conditionsManufacturer sourceManufacturer-linked technical sheet 00e45f600a-PolyLite_ABS_TDS_EN_V5.4. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Enclosure guidance | needed | Source & conditionsManufacturer sourceManufacturer-linked technical sheet 00e45f600a-PolyLite_ABS_TDS_EN_V5.4. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
Reviewed color options
| Color | Approx. HEX | Available sizes |
|---|---|---|
| Metallic Blue | #0D2441 | 1.75 mm · 1 kg · Spool |
| Metallic Green | #3D441E | 1.75 mm · 1 kg · Spool |
These pages reflect selected, independently reviewed catalog evidence. They are not hands-on test results. Missing facts remain unverified. Manufacturer recommendations can vary by machine and application.