Polymaker HT-PLA-GF: colors, sizes and print guidance

Compare 9 reviewed colors of Polymaker HT-PLA-GF, available sizes and documented manufacturer guidance.

Compare colors and available sizes

Manufacturer guidance

Property Reviewed value Evidence
Material PLA
Source & conditionsManufacturer source

Manufacturer product identity and description. For breakaway supports, polymer composition remains undisclosed; the family label describes the support category.

Minimum nozzle temperature 210.0 °C
Source & conditionsManufacturer source

Reseller hub technical sheet TDS_Polymaker_HT-PLA-GF_V1.2_2025-12-09_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Maximum nozzle temperature 230.0 °C
Source & conditionsManufacturer source

Reseller hub technical sheet TDS_Polymaker_HT-PLA-GF_V1.2_2025-12-09_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Minimum bed temperature 25.0 °C
Source & conditionsManufacturer source

Reseller hub technical sheet TDS_Polymaker_HT-PLA-GF_V1.2_2025-12-09_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Maximum bed temperature 60.0 °C
Source & conditionsManufacturer source

Reseller hub technical sheet TDS_Polymaker_HT-PLA-GF_V1.2_2025-12-09_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Drying temperature 60.0 °C
Source & conditionsManufacturer source

Reseller hub technical sheet TDS_Polymaker_HT-PLA-GF_V1.2_2025-12-09_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Drying duration 6.0 hours
Source & conditionsManufacturer source

Reseller hub technical sheet TDS_Polymaker_HT-PLA-GF_V1.2_2025-12-09_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Density 1.34 g/cm3
Source & conditionsManufacturer source

Reseller hub technical sheet TDS_Polymaker_HT-PLA-GF_V1.2_2025-12-09_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Abrasive Yes
Source & conditionsManufacturer source

Manufacturer product description explicitly identifies this filament as abrasive.

Hardened nozzle recommended Yes
Source & conditionsManufacturer source

Manufacturer product description explicitly recommends or requires a hardened nozzle. No negative recommendation is inferred for other products.

Enclosure guidance not needed
Source & conditionsManufacturer source

Reseller hub technical sheet TDS_Polymaker_HT-PLA-GF_V1.2_2025-12-09_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Reviewed color options

Color Approx. HEX Available sizes
Army Green #61583C 1.75 mm · 1 kg · Spool
Black #18191B 1.75 mm · 1 kg · Spool
Blue #084989 1.75 mm · 1 kg · Spool
Grey #91999F 1.75 mm · 1 kg · Spool
Power Tool Green #CECF45 1.75 mm · 1 kg · Spool
Power Tool Red #CA4140 1.75 mm · 1 kg · Spool
Power Tool Teal #215966 1.75 mm · 1 kg · Spool
Power Tool Yellow #F6B649 1.75 mm · 1 kg · Spool
White #EFF0EB 1.75 mm · 1 kg · Spool

These pages reflect selected, independently reviewed catalog evidence. They are not hands-on test results. Missing facts remain unverified. Manufacturer recommendations can vary by machine and application.