Polymaker Fiberon PPS-GF20: colors, sizes and print guidance

Compare 1 reviewed colors of Polymaker Fiberon PPS-GF20, available sizes and documented manufacturer guidance.

Compare colors and available sizes

Manufacturer guidance

Property Reviewed value Evidence
Material PPS
Source & conditionsManufacturer source

Manufacturer product identity and description. For breakaway supports, polymer composition remains undisclosed; the family label describes the support category.

Minimum nozzle temperature 310.0 °C
Source & conditionsManufacturer source

Manufacturer-linked technical sheet 36a8bf9f5c-TDS_FIBERON_PPS-GF20_V1.1. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Maximum nozzle temperature 350.0 °C
Source & conditionsManufacturer source

Manufacturer-linked technical sheet 36a8bf9f5c-TDS_FIBERON_PPS-GF20_V1.1. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Minimum bed temperature 80.0 °C
Source & conditionsManufacturer source

Manufacturer-linked technical sheet 36a8bf9f5c-TDS_FIBERON_PPS-GF20_V1.1. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Maximum bed temperature 90.0 °C
Source & conditionsManufacturer source

Manufacturer-linked technical sheet 36a8bf9f5c-TDS_FIBERON_PPS-GF20_V1.1. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Drying temperature 100.0 °C
Source & conditionsManufacturer source

Manufacturer-linked technical sheet 36a8bf9f5c-TDS_FIBERON_PPS-GF20_V1.1. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Drying duration 10.0 hours
Source & conditionsManufacturer source

Manufacturer-linked technical sheet 36a8bf9f5c-TDS_FIBERON_PPS-GF20_V1.1. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Hardened nozzle recommended Yes
Source & conditionsManufacturer source

Manufacturer product description explicitly recommends or requires a hardened nozzle. No negative recommendation is inferred for other products.

Enclosure guidance not needed
Source & conditionsManufacturer source

Manufacturer product page, Technical Specifications. Product-specific guidance; not independent testing.

Reviewed color options

Color Approx. HEX Available sizes
Grey #75787B 1.75 mm · 0.5 kg · Spool; 1.75 mm · 3 kg · Spool

These pages reflect selected, independently reviewed catalog evidence. They are not hands-on test results. Missing facts remain unverified. Manufacturer recommendations can vary by machine and application.