Polymaker Fiberon PPS-CF10: colors, sizes and print guidance
Compare 1 reviewed colors of Polymaker Fiberon PPS-CF10, available sizes and documented manufacturer guidance.
Compare colors and available sizes
Manufacturer guidance
| Property | Reviewed value | Evidence |
|---|---|---|
| Material | PPS | Source & conditionsManufacturer sourceManufacturer product identity and description. For breakaway supports, polymer composition remains undisclosed; the family label describes the support category. |
| Minimum nozzle temperature | 310.0 °C | Source & conditionsManufacturer sourceManufacturer-linked technical sheet 1ff1930e3f-TDS_FIBERON-PPS-CF10_V1.1_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Maximum nozzle temperature | 350.0 °C | Source & conditionsManufacturer sourceManufacturer-linked technical sheet 1ff1930e3f-TDS_FIBERON-PPS-CF10_V1.1_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Minimum bed temperature | 80.0 °C | Source & conditionsManufacturer sourceManufacturer-linked technical sheet 1ff1930e3f-TDS_FIBERON-PPS-CF10_V1.1_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Maximum bed temperature | 90.0 °C | Source & conditionsManufacturer sourceManufacturer-linked technical sheet 1ff1930e3f-TDS_FIBERON-PPS-CF10_V1.1_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Drying temperature | 100.0 °C | Source & conditionsManufacturer sourceManufacturer-linked technical sheet 1ff1930e3f-TDS_FIBERON-PPS-CF10_V1.1_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Drying duration | 10.0 hours | Source & conditionsManufacturer sourceManufacturer-linked technical sheet 1ff1930e3f-TDS_FIBERON-PPS-CF10_V1.1_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Density | 1.29 g/cm3 | Source & conditionsManufacturer sourceManufacturer-linked technical sheet 1ff1930e3f-TDS_FIBERON-PPS-CF10_V1.1_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements. |
| Hardened nozzle recommended | Yes | Source & conditionsManufacturer sourceManufacturer product description explicitly recommends or requires a hardened nozzle. No negative recommendation is inferred for other products. |
| Enclosure guidance | not needed | Source & conditionsManufacturer sourceManufacturer product page, Technical Specifications. Product-specific guidance; not independent testing. |
Reviewed color options
| Color | Approx. HEX | Available sizes |
|---|---|---|
| Black | #302E2F | 1.75 mm · 0.5 kg · Spool; 1.75 mm · 3 kg · Spool |
These pages reflect selected, independently reviewed catalog evidence. They are not hands-on test results. Missing facts remain unverified. Manufacturer recommendations can vary by machine and application.