Polymaker Fiberon PETG-rCF08: colors, sizes and print guidance

Compare 1 reviewed colors of Polymaker Fiberon PETG-rCF08, available sizes and documented manufacturer guidance.

Compare colors and available sizes

Manufacturer guidance

Property Reviewed value Evidence
Material PETG
Source & conditionsManufacturer source

Manufacturer product identity and description. For breakaway supports, polymer composition remains undisclosed; the family label describes the support category.

Minimum nozzle temperature 240.0 °C
Source & conditionsManufacturer source

Manufacturer-linked technical sheet 572fb91ee2-TDS_FIBERON-PETG-rCF08_V1.0_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Maximum nozzle temperature 270.0 °C
Source & conditionsManufacturer source

Manufacturer-linked technical sheet 572fb91ee2-TDS_FIBERON-PETG-rCF08_V1.0_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Minimum bed temperature 60.0 °C
Source & conditionsManufacturer source

Manufacturer-linked technical sheet 572fb91ee2-TDS_FIBERON-PETG-rCF08_V1.0_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Maximum bed temperature 70.0 °C
Source & conditionsManufacturer source

Manufacturer-linked technical sheet 572fb91ee2-TDS_FIBERON-PETG-rCF08_V1.0_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Drying temperature 65.0 °C
Source & conditionsManufacturer source

Manufacturer-linked technical sheet 572fb91ee2-TDS_FIBERON-PETG-rCF08_V1.0_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Drying duration 3.0 hours
Source & conditionsManufacturer source

Manufacturer-linked technical sheet 572fb91ee2-TDS_FIBERON-PETG-rCF08_V1.0_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Density 1.3 g/cm3
Source & conditionsManufacturer source

Manufacturer-linked technical sheet 572fb91ee2-TDS_FIBERON-PETG-rCF08_V1.0_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Enclosure guidance not needed
Source & conditionsManufacturer source

Manufacturer product page, Technical Specifications. Product-specific guidance; not independent testing.

Reviewed color options

Color Approx. HEX Available sizes
Black Not verified 1.75 mm · 0.5 kg · Spool; 1.75 mm · 3 kg · Spool

These pages reflect selected, independently reviewed catalog evidence. They are not hands-on test results. Missing facts remain unverified. Manufacturer recommendations can vary by machine and application.