Polymaker Fiberon PA6-CF20: colors, sizes and print guidance

Compare 1 reviewed colors of Polymaker Fiberon PA6-CF20, available sizes and documented manufacturer guidance.

Compare colors and available sizes

Manufacturer guidance

Property Reviewed value Evidence
Material PA6
Source & conditionsManufacturer source

Manufacturer product identity and description. For breakaway supports, polymer composition remains undisclosed; the family label describes the support category.

Minimum nozzle temperature 280.0 °C
Source & conditionsManufacturer source

Manufacturer-linked technical sheet d03c510be4-TDS_FIBERON_PA6-CF20_V1.1_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Maximum nozzle temperature 300.0 °C
Source & conditionsManufacturer source

Manufacturer-linked technical sheet d03c510be4-TDS_FIBERON_PA6-CF20_V1.1_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Minimum bed temperature 40.0 °C
Source & conditionsManufacturer source

Manufacturer-linked technical sheet d03c510be4-TDS_FIBERON_PA6-CF20_V1.1_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Maximum bed temperature 50.0 °C
Source & conditionsManufacturer source

Manufacturer-linked technical sheet d03c510be4-TDS_FIBERON_PA6-CF20_V1.1_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Drying temperature 100.0 °C
Source & conditionsManufacturer source

Manufacturer-linked technical sheet d03c510be4-TDS_FIBERON_PA6-CF20_V1.1_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Drying duration 10.0 hours
Source & conditionsManufacturer source

Manufacturer-linked technical sheet d03c510be4-TDS_FIBERON_PA6-CF20_V1.1_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Density 1.17 g/cm3
Source & conditionsManufacturer source

Manufacturer-linked technical sheet d03c510be4-TDS_FIBERON_PA6-CF20_V1.1_EN. Recommended printing conditions; density at 23 C where stated. Reseller documents take priority over the retail widget. Manufacturer specifications, not independent measurements.

Abrasive Yes
Source & conditionsManufacturer source

Manufacturer product description explicitly identifies this filament as abrasive.

Hardened nozzle recommended Yes
Source & conditionsManufacturer source

Manufacturer product description explicitly recommends or requires a hardened nozzle. No negative recommendation is inferred for other products.

Enclosure guidance recommended
Source & conditionsManufacturer source

Manufacturer product page, Technical Specifications. Product-specific guidance; not independent testing.

Reviewed color options

Color Approx. HEX Available sizes
Black #312F2F 1.75 mm · 0.5 kg · Spool · new-packaging; 1.75 mm · 0.5 kg · Spool · old-packaging; 1.75 mm · 1 kg · Spool · new-packaging; 1.75 mm · 2 kg · Spool · old-packaging; 1.75 mm · 3 kg · Spool · new-packaging

These pages reflect selected, independently reviewed catalog evidence. They are not hands-on test results. Missing facts remain unverified. Manufacturer recommendations can vary by machine and application.