Tronxy X5SA-400 3D Printer Specifications

Printer hub

Tronxy X5SA-400

The standard Tronxy X5SA-400 is an FFF/FDM filament printer with a manufacturer-listed 400 × 400 × 400 mm print size. Tronxy advertises a 3.5-inch touchscreen, auto leveling, filament runout detection and power-failure print resume. Thes...

Printer details

Manufacturer: Tronxy. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build volume: Standard build area: Tronxy X5SA-400: 400 × 400 × 400 mm Source
  • Build width: 400 mm Source
  • Build depth: 400 mm Source
  • Build height: 400 mm Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Promotional render labeled Tronxy X5SA-400, showing the printer and sample prints.
Official Tronxy promotional render for the X5SA-400. Credit: Tronxy. Manufacturer render. Credit: Tronxy.

Overview

The standard Tronxy X5SA-400 is an FFF/FDM filament printer with a manufacturer-listed 400 × 400 × 400 mm print size. Tronxy advertises a 3.5-inch touchscreen, auto leveling, filament runout detection and power-failure print resume. These are manufacturer-listed features, not independent test results.

Keep this base model distinct from the X5SA-400 Pro and X5SA-400-2E. Tronxy provides separate manuals and firmware entries for those configurations.

Tronxy X5SA-400 specifications

Buying advice

A reviewed US direct-retailer destination is available for the exact X5SA-400 kit. The approved configuration is marked for US shipping; the saved review did not verify current stock, price or delivery. Tronxy's own listing displayed Sold Out when checked on November 18, 2026, so its page is not evidence of current manufacturer-store availability.

3D Printers Online Store: Tronxy X5SA-400 kit, US configuration

Tronxy X5SA-400 manufacturer listing

Accessories and replacement parts

Use Tronxy's X5SA-400 installation guide for assembly and setup. The firmware page lists separate parameter firmware for X5SA-400, X5SA-400 Pro and X5SA-400-2E; confirm the exact model and hardware revision before selecting a file.

X5SA-400 installation guide

Tronxy firmware downloads

Tronxy support center

Reviews and guides

A 2021 hands-on review specifically identifies the X5SA-400 and covers assembly, initial quality, test prints and heated-bed tests. Treat it as one reviewer's experience with a kit from that period, not a guarantee for every unit or later hardware revision. The 400 mm cubic build area is useful for large single-piece prints, but a kit of this size needs adequate assembly and operating space.

X5SA-400 hands-on review by LilMikey's Big Plans

Tronxy X5SA-400 buying guide

Tronxy X5SA-400 vs X5SA-400 Pro comparison