Sovol SV08 3D Printer Specifications
Sovol SV08
The Sovol SV08 is an open-frame CoreXY FFF/FDM printer with a manufacturer-listed 350 × 350 × 345 mm build envelope. This source-based guide describes the standard SV08 configuration; bundles that add an enclosure or upgraded screen are ...
Printer details
Manufacturer: Sovol. Technology: FDM / FFF.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build envelope: Published build envelope — Sovol SV08 standard configuration (SV08 350*350*345mm): 350 × 350 × 345 mm Source
- Enclosure: Open frame; enclosure optional Source
- Maximum hotend temperature: 300 C Source
- Maximum bed temperature: 100 C Source
- Filament diameter: 1.75 mm Source
- Included nozzle diameter: 0.4 mm Source
- Extruder type: Direct drive Source
- Motion system: CoreXY Source
- Automatic bed leveling: Yes Source
- Filament runout detection: Yes Source
- Included camera: Yes Source
- Wi-Fi: Yes Source
- Ethernet: Yes Source
- Advertised maximum speed: 700 mm/s Source
- Advertised maximum acceleration: 40000 mm/s2 Source
- Input shaping: Yes Source
- Open-source printer: Yes Source
- Manufacturer material guidance: PLA, PETG, TPU, PETG-CF, ABS Source
- Compatible slicers: OrcaSlicer, Cura, PrusaSlicer, Simplify3D Source
- Supported operating systems: Windows, Linux, macOS Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.

Overview
The Sovol SV08 is an open-frame CoreXY FFF/FDM printer with a manufacturer-listed 350 × 350 × 345 mm build envelope. This source-based guide describes the standard SV08 configuration; bundles that add an enclosure or upgraded screen are separate options.
The standard SV08 combines a large 350 × 350 × 345 mm manufacturer-listed print envelope with CoreXY motion, four independent Z motors, all-axis linear rails and a built-in camera. Its open-frame form and large footprint are relevant when planning placement and material use.
Sovol advertises speeds up to 700 mm/s and acceleration up to 40,000 mm/s². These are manufacturer limits, not a promise that every material, geometry or quality target can use those settings.
The product page lists a 0.4 mm nozzle as included and 0.2, 0.6 and 0.8 mm nozzle options. It lists a maximum nozzle temperature of 300°C and a bed limit of 100°C. The page names PLA, PETG, TPU, PETG-CF and ABS, with additional materials described broadly; check the exact filament requirements and use conditions before printing.
The standard listing is distinct from options adding an open enclosure, an upgraded HDMI screen, or a hardened-steel nozzle kit. Confirm the selected option and included equipment at checkout.
Buying advice
Sovol’s US product page offers the SV08 standard configuration and bundles through the same product listing. Choose the standard SV08 option if you want the base open-frame printer, and inspect the bundle selector before checkout. This is a verified manufacturer checkout destination; price and stock may change.
Accessories and replacement parts
Sovol’s download center lists the SV08 user manual, firmware, slicer profiles, configuration files, top kit, and enclosure resources. Use the model-specific manual and current profile for setup.
Reviews and guides
Manufacturer-source research only. GoodPrints3D has not independently tested this printer. Advertised speed and temperature limits are manufacturer specifications, not independently measured performance.
This guide uses manufacturer descriptions and does not report hands-on print tests, independently measured throughput, or a verified shipping date. The current product page presents a US shipping selection and purchasable SV08 configurations; regional availability and bundle contents should be reconfirmed at purchase.