Sinterit NILS 480 3D Printer Specifications
Sinterit NILS 480
Sinterit describes the NILS 480 as an industrial SLS printer with a 200 × 200 × 330 mm (W × D × H) build volume. Its brochure lists a 10–14 mm/h build speed, a galvo scanner, an IR 30 W laser, and a 560 μm laser spot. These are manufactu...
Printer details
Manufacturer: Sinterit. Technology: SLS.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build width: 200 mm Source
- Build depth: 200 mm Source
- Build height: 330 mm Source
- Compatible slicers: Sinterit Studio Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.
Overview
Sinterit describes the NILS 480 as an industrial SLS printer with a 200 × 200 × 330 mm (W × D × H) build volume. Its brochure lists a 10–14 mm/h build speed, a galvo scanner, an IR 30 W laser, and a 560 μm laser spot. These are manufacturer specifications, not independently measured results.
The manufacturer describes open printing parameters with external materials, plus Automatic Powder Distribution and Continuous Printing systems. It identifies Sinterit Studio for preparation and positions the machine for industrial production. Actual throughput and cost depend on material, refresh ratio, packing, machine settings, maintenance and operating conditions.
A good fit for
- Industrial SLS workflows that need a 200 × 200 × 330 mm nominal build envelope.
- Teams seeking manufacturer-described automated powder distribution and continuous printing systems.
Keep in mind
- The stated 10–14 mm/h is a manufacturer specification; actual throughput depends on material, settings, packing and operating conditions.
- Sinterit says inert gas control requires an external gas supply in the NILS 480 system information.
Buying advice
No current authorized buying route or offer was verified in this research. Confirm availability, configuration, pricing and included equipment directly with Sinterit before purchase.
Accessories and replacement parts
Sinterit's brochure depicts a Powder Handling Station, an ATEX/Intertek vacuum and a Sandblaster SLS as parts of its wider post-processing and powder-management solution. The brochure does not establish exact NILS 480 compatibility, included status or current availability for each item, so verify configuration with Sinterit.
Reviews and guides
No independently tested review or model-specific GoodPrints3D guide was verified for this research packet.