Robo E3 3D Printer Specifications
Manufacturer: Robo. Technology: FDM / FFF.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build volume: Standard build area: Robo E3: 150 × 150 × 150 mm Source
- Build width: 150 mm Source
- Build depth: 150 mm Source
- Build height: 150 mm Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.

Overview
The Robo E3 is an FFF printer with a documented 150 × 150 × 150 mm build area and a removable single extruder. Its user guide describes an onboard camera, HEPA filter, Wi-Fi and Ethernet connections, and USB storage. The camera and USB stick share an interface and cannot be used at the same time.
Robo lists the E3 as compatible with its RoboPrint desktop software and RoboCloud online software. The E3 guide identifies PLA and ABS; Robo advises that other brands may vary and recommends Robo PLA for best results.
A good fit for
- Parts that fit within the documented 150 mm cube build area.
- Owners who want the official RoboPrint desktop or RoboCloud online workflow.
- Owners who can use the model's documented PLA and ABS filament guidance.
Keep in mind
- The camera and USB stick cannot be used simultaneously, so choose the required function when setting up the printer.
- Robo says third-party filament is allowed but not recommended, and recommends Robo PLA for best results.
Buying advice
A current exact-model purchase destination was not verified during this research. Availability and current pricing remain unknown.
Accessories and replacement parts
Robo's E3 support articles explain how to replace the removable extruder nozzle and recalibrate afterward. These are model-specific maintenance instructions; check the exact part before ordering a replacement.
Reviews and guides
This guide is a source-based reference and does not report hands-on print testing.