QIDI X-Smart 3 3D Printer Specifications
QIDI X-Smart 3
The QIDI X-Smart 3 is an FDM/CoreXY printer with a 175 × 180 × 170 mm build area. QIDI advertises up to 500 mm/s printing speed, 20,000 mm/s² acceleration and 30 mm³/s flow; these are manufacturer specifications, not independent test res...
Printer details
Manufacturer: QIDI. Technology: FDM / FFF.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build volume: Standard build area: QIDI X-Smart 3: 175 × 180 × 170 mm Source
- Build width: 175 mm Source
- Build depth: 180 mm Source
- Build height: 170 mm Source
- Motion system: CoreXY Source
- Automatic bed leveling: Yes Source
- Advertised maximum speed: 500 mm/s Source
- Advertised maximum acceleration: 20000 mm/s2 Source
- Manufacturer material guidance: PLA, ABS, PETG; the manufacturer page adds 'etc.' without enumerating a complete list. Source
- Compatible slicers: QIDI Slicer; QIDI Print is not compatible with the X-Smart 3. Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.

Overview
The QIDI X-Smart 3 is an FDM/CoreXY printer with a 175 × 180 × 170 mm build area. QIDI advertises up to 500 mm/s printing speed, 20,000 mm/s² acceleration and 30 mm³/s flow; these are manufacturer specifications, not independent test results.
QIDI's product page names PLA, ABS and PETG among supported materials, but leaves the rest unspecified with 'etc.' The exact-material list should therefore be treated as incomplete.
A good fit for
- Prints that fit within the 175 × 180 × 170 mm build area.
- Owners who want a CoreXY FDM printer with manufacturer-stated automatic leveling.
Keep in mind
- The build area limits the size of a single-piece print.
- The 500 mm/s figure is an advertised maximum, not a measured print rate or a guarantee of quality at that speed.
- QIDI's product page names PLA, ABS and PETG but does not provide a complete supported-material list.
Buying advice
QIDI's official X-Smart 3 page is a verified manufacturer information destination. This research did not verify an active exact-model checkout or current stock, so confirm availability, region, bundle contents and seller terms before ordering.
Accessories and replacement parts
QIDI's exact-model wiki links an X-Smart 3 Quick Start Guide and organizes model-specific maintenance and troubleshooting resources. QIDI also publishes an X-Smart 3 camera installation video; it does not establish whether a camera is included in every bundle, so confirm the exact configuration with the seller.
QIDI X-Smart 3 Quick Start Guide
QIDI X-Smart 3 support and maintenance wiki
Reviews and guides
No independent, exact-model hands-on test was verified for this research packet. Manufacturer performance specifications above are not presented as test results.