QIDI X-Plus 3 3D Printer Specifications

Printer hub

QIDI X-Plus 3

The QIDI X-Plus 3 is an enclosed CoreXY filament printer with a 280 × 280 × 270 mm build envelope and an actively heated chamber rated up to 65 °C. It is a different size and configuration from the X-Max 3 and the newer Plus 4. Compare e...

Printer details

Manufacturer: QIDI. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build width: 280 mm Source
  • Build depth: 280 mm Source
  • Build height: 270 mm Source
  • Machine width: 511 mm Source
  • Machine depth: 527 mm Source
  • Machine height: 529 mm Source
  • Machine weight: 24.3 kg Source
  • Enclosure: Enclosed Source
  • Active chamber heating: Yes Source
  • Maximum chamber temperature: 65 C Source
  • Maximum bed temperature: 120 C Source
  • Filament diameter: 1.75 mm Source
  • Included nozzle diameter: 0.4 mm Source
  • Extruder type: Direct drive Source
  • Motion system: CoreXY Source
  • Automatic bed leveling: Yes Source
  • Filament runout detection: Yes Source
  • Wi-Fi: Yes Source
  • USB printing: Yes Source
  • Advertised maximum speed: 500 mm/s Source
  • Advertised maximum acceleration: 20000 mm/s2 Source
  • Input shaping: Yes Source
  • Manufacturer material guidance: ABS, ASA, PETG, TPU Source
  • Air filtration: Activated carbon filter Source
  • Compatible slicers: QIDI Print, Cura, Simplify3D, PrusaSlicer Source
  • Supported operating systems: Windows, macOS, Linux Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

QIDI X-Plus 3 manufacturer product image
Manufacturer presentation of QIDI X-Plus 3. Verify optional equipment and package contents at the seller. Manufacturer render. Credit: QIDI.

Overview

The QIDI X-Plus 3 is an enclosed CoreXY filament printer with a 280 × 280 × 270 mm build envelope and an actively heated chamber rated up to 65 °C. It is a different size and configuration from the X-Max 3 and the newer Plus 4. Compare exact model data before choosing a profile or replacement part.

QIDI describes interchangeable hotend choices and a chamber suited to temperature-sensitive filament workflows. Manufacturer pages differ in their peak-speed presentation; the reviewed catalog table retains its source-specific figure. Use the exact machine profile and filament limits when estimating a job.

The reviewed specification table below retains its individual sources and configuration notes. Use those qualifications when checking a seller or a replacement part. The manufacturer image identifies this model; optional equipment and sample prints shown in presentation imagery should be checked against the package actually selected.

A good fit for

  • Existing X-Plus 3 owners seeking model-specific setup and troubleshooting.
  • Enclosed filament projects within a 280 × 280 × 270 mm envelope.

Keep in mind

  • A verified current checkout route was not established in this research.
  • The X-Plus 3, X-Max 3 and Plus 4 have different parts and dimensions.
  • Check hotend material and filament conditions before using reinforced blends.

Official QIDI X-Plus 3 setup and support

Compare reviewed printer specifications

Buying advice

The official X-Plus 3 page is a useful model reference. A product-information page does not establish current stock or a purchase-ready offer. If considering remaining stock or a used unit, verify the exact printer, installed hotend, plate, chamber-heating function and available replacement parts with the seller.

Compare the complete setup rather than the headline machine price. Check the exact model, regional power requirements, included consumables, delivery terms and support directly with the seller. Prices, promotions and inventory change, so this guide does not store a live amount or promise stock.

Accessories and replacement parts

The QIDI support center and X-Plus 3 wiki provide manuals, firmware and troubleshooting. Start with the specific first-layer guidance before changing many slicer settings at once. Match the firmware and slicer profile to the X-Plus 3, then confirm the installed hotend and nozzle for the chosen filament.

Before a first or materially changed print, confirm the machine profile, installed nozzle diameter, build plate and filament settings in the slicer. Use the applicable manual for calibration and loading, then inspect the first layer and layer preview. Save a known-good profile before changing firmware, hardware and material settings together.

Keep the build surface, filament path and motion components maintained according to the model instructions. Choose drying and storage conditions from the filament maker, and check whether a feeder accepts the exact filament before routing it through an automatic system. A supported polymer name does not establish every reinforced blend, spool or geometry.

Official setup, maintenance and downloads

Reviews and guides

This is a research-based buying and ownership guide assembled from the exact-model manufacturer sources linked here. No GoodPrints3D measurements of print quality, noise, energy consumption or long-term reliability are reported in this guide.

Compare usable build space, material conditions, preparation time, software, replacement parts and the equipment actually required for your projects. Maximum toolhead speed is only one input to a job; infill, walls, cooling, filament flow and acceleration also influence completion time.

For an existing machine, use the official owner resources alongside the specification table and the model discussion. Record the hardware revision, installed nozzle or vat, firmware and material when comparing a result or asking for help; those details make advice and replacement-part checks more useful.

Open the 3D printer comparison tool