QIDI X-Max 3 3D Printer Specifications

Printer hub

QIDI X-Max 3

The QIDI X-Max 3 is an enclosed CoreXY filament printer with a 325 × 325 × 315 mm build envelope and active chamber heating rated up to 65 °C. Its manufacturer-listed temperature and material capabilities are relevant to larger functiona...

Printer details

Manufacturer: QIDI. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build width: 325 mm Source
  • Build depth: 325 mm Source
  • Build height: 315 mm Source
  • Machine width: 553 mm Source
  • Machine depth: 553 mm Source
  • Machine height: 601 mm Source
  • Machine weight: 30.2 kg Source
  • Enclosure: Enclosed Source
  • Active chamber heating: Yes Source
  • Maximum chamber temperature: 65 C Source
  • Maximum hotend temperature: 350 C Source
  • Maximum bed temperature: 120 C Source
  • Filament diameter: 1.75 mm Source
  • Included nozzle diameter: 0.4 mm Source
  • Extruder type: Direct drive Source
  • Motion system: CoreXY Source
  • Automatic bed leveling: Yes Source
  • Filament runout detection: Yes Source
  • Wi-Fi: Yes Source
  • USB printing: Yes Source
  • Advertised maximum speed: 600 mm/s Source
  • Advertised maximum acceleration: 20000 mm/s2 Source
  • Input shaping: Yes Source
  • Manufacturer material guidance: PLA, ABS, ASA, PETG, TPU, PC, nylon and compatible composites Source
  • Air filtration: Activated carbon filter Source
  • Compatible slicers: QIDI Print, Cura, Simplify3D, PrusaSlicer Source
  • Supported operating systems: Windows, macOS, Linux Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

QIDI X-Max 3 manufacturer product image
Manufacturer presentation of QIDI X-Max 3. Verify optional equipment and package contents at the seller. Credit: QIDI.

Overview

The QIDI X-Max 3 is an enclosed CoreXY filament printer with a 325 × 325 × 315 mm build envelope and active chamber heating rated up to 65 °C. Its manufacturer-listed temperature and material capabilities are relevant to larger functional parts, provided the installed hotend, drying and filament profile are suitable.

QIDI identifies this model as discontinued. This guide remains useful for existing owners and people assessing remaining stock or a used machine. The X-Max 3 and newer Max4 are separate models, so parts, software and seller descriptions need an exact model check.

The reviewed specification table below retains its individual sources and configuration notes. Use those qualifications when checking a seller or a replacement part. The manufacturer image identifies this model; optional equipment and sample prints shown in presentation imagery should be checked against the package actually selected.

A good fit for

  • Existing X-Max 3 owners looking for support and maintenance resources.
  • Larger enclosed filament projects within the 325 × 325 × 315 mm envelope.

Keep in mind

  • The manufacturer identifies the printer as discontinued.
  • Support and spare-part availability matter when evaluating a used machine.
  • Temperature and speed ratings do not establish measured part performance.

Official QIDI X-Max 3 setup and support

Compare reviewed printer specifications

Buying advice

Treat any remaining-stock or used offer as a specific machine and package. Check the hotend and nozzle type, plate condition, chamber heater operation, regional voltage and seller support. The official regional product pages provide historical and configuration information; this guide does not promise a currently purchasable US offer or inventory.

Compare the complete setup rather than the headline machine price. Check the exact model, regional power requirements, included consumables, delivery terms and support directly with the seller. Prices, promotions and inventory change, so this guide does not store a live amount or promise stock.

QIDI US X-Max 3 product page

QIDI EU X-Max 3 product page

Accessories and replacement parts

QIDI retains X-Max 3 support resources. Start from the exact model manual and firmware entry, and preserve the installed configuration when servicing an older machine. Match the nozzle material to abrasive filament requirements and avoid substituting a Plus 4 or Max4 hotend based only on brand or temperature rating.

Before a first or materially changed print, confirm the machine profile, installed nozzle diameter, build plate and filament settings in the slicer. Use the applicable manual for calibration and loading, then inspect the first layer and layer preview. Save a known-good profile before changing firmware, hardware and material settings together.

Keep the build surface, filament path and motion components maintained according to the model instructions. Choose drying and storage conditions from the filament maker, and check whether a feeder accepts the exact filament before routing it through an automatic system. A supported polymer name does not establish every reinforced blend, spool or geometry.

Official setup, maintenance and downloads

Reviews and guides

This is a research-based buying and ownership guide assembled from the exact-model manufacturer sources linked here. No GoodPrints3D measurements of print quality, noise, energy consumption or long-term reliability are reported in this guide.

Compare usable build space, material conditions, preparation time, software, replacement parts and the equipment actually required for your projects. Maximum toolhead speed is only one input to a job; infill, walls, cooling, filament flow and acceleration also influence completion time.

For an existing machine, use the official owner resources alongside the specification table and the model discussion. Record the hardware revision, installed nozzle or vat, firmware and material when comparing a result or asking for help; those details make advice and replacement-part checks more useful.