Prusa XL+ 3D Printer Specifications

Printer hub

Prusa XL+

The Prusa XL+ is a large-format FFF printer with a 360 × 360 × 360 mm build volume and a toolchanger configuration of one to five independent toolheads. The XL+ refresh adds updated calibration, belts, cooling and a nozzle wiper to the O...

Printer details

Manufacturer: Prusa. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build width: 360 mm Source
  • Build depth: 360 mm Source
  • Build height: 360 mm Source
  • Machine width: 700 mm Source
  • Machine depth: 900 mm Source
  • Machine height: 720 mm Source
  • Machine weight: 30 kg Source
  • Enclosure: Open frame; optional enclosure Source
  • Maximum hotend temperature: 290 C Source
  • Maximum bed temperature: 115 C Source
  • Filament diameter: 1.75 mm Source
  • Extruder type: Direct drive Nextruder Source
  • Motion system: CoreXY Source
  • Automatic bed leveling: Yes Source
  • Ethernet: Yes Source
  • USB printing: Yes Source
  • Offline printing: Yes Source
  • Multicolor / multi-material system: Toolchanger with 1 to 5 toolheads, depending on configuration Source
  • Input shaping: Yes Source
  • Launch date: 2026-08-13 Source
  • Manufacturer material guidance: PLA, PETG, ASA, ABS, PC, PA, TPU, PVA, HIPS, PP, CPE, PVB and carbon-fiber composites Source
  • Compatible slicers: PrusaSlicer Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Prusa XL+ large-format multi-material 3D printer
Prusa XL+ product image. Credit: Prusa Research.

Overview

The Prusa XL+ is a large-format FFF printer with a 360 × 360 × 360 mm build volume and a toolchanger configuration of one to five independent toolheads. The XL+ refresh adds updated calibration, belts, cooling and a nozzle wiper to the Original Prusa XL platform.

A good fit for

  • Large single-piece prints within a 360 × 360 × 360 mm build space.
  • Combining different materials or nozzle sizes in one job when equipped with multiple toolheads.

Keep in mind

  • Toolhead count depends on the chosen configuration; the one-tool version does not provide multi-material printing without an upgrade.
  • The enclosure and external heater are optional accessories, so enclosed chamber conditions depend on the purchased setup.

Original Prusa XL support and handbook

Buying advice

Choose the one-, two- or five-toolhead configuration around the materials and nozzle sizes you expect to use together. The XL+ platform can be expanded with additional toolheads; bundle contents and regional buying options should be checked on the manufacturer product page.

Accessories and replacement parts

The XL+ Enclosure is an optional accessory for a warmer, more stable print environment. Prusa lists chamber temperatures up to 50°C with the enclosure and up to 60°C with the enclosure and external heater; confirm current availability and configuration on the product page.

XL+ enclosure and configuration details

Reviews and guides

The XL+ is the 2026 refreshed generation of the Original Prusa XL platform. Prusa’s XL support center provides the current handbook, firmware, slicer downloads, upgrade instructions and troubleshooting resources. Independent XL+ review coverage was not linked in the manufacturer material reviewed for this proposal.