Prusa CORE One L 3D Printer Specifications

Printer hub

Prusa CORE One L

The CORE One L has a documented 300 x 300 x 330 mm build area. Prusa lists this exact model separately from the smaller CORE One in its printer-size FAQ.

Printer details

Manufacturer: Prusa. Technology: FDM / FFF.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build volume: Standard build area: Prusa CORE One L: 300 × 300 × 330 mm Source
  • Build width: 300 mm Source
  • Build depth: 300 mm Source
  • Build height: 330 mm Source
  • Machine weight: 21.9 kg Source
  • Enclosure: fully_enclosed Source
  • Maximum hotend temperature: 290 C Source
  • Maximum bed temperature: 120 C Source
  • Compatible slicers: PrusaSlicer Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Overview

The CORE One L has a documented 300 x 300 x 330 mm build area. Prusa lists this exact model separately from the smaller CORE One in its printer-size FAQ.

Prusa describes the CORE One L as an enclosed CoreXY FDM printer with a 60 °C maximum chamber temperature. Its technical parameters list a 290 °C maximum nozzle temperature and 120 °C maximum heatbed temperature. The optional HT Hotend and filtration accessories affect material capability and are not assumed to be included.

A good fit for

  • Printing larger parts within the 300 x 300 x 330 mm build area.
  • Projects that benefit from an enclosed CoreXY printer and a chamber temperature up to 60 °C.

Keep in mind

  • Allow additional space beside the printer for spool access.
  • The official page Buy control currently redirects to the CORE One L+ product page, so verify the exact model and revision before purchase.
  • The 400 °C HT Hotend and advanced filtration are options; do not treat their capabilities as standard equipment.

CORE One L support, handbook and setup resources

Buying advice

Prusa’s CORE One L product page currently sends its Buy control to a CORE One L+ product page. Because that destination identifies the L+ revision, this research does not treat it as a verified purchase route for the original CORE One L. Confirm the exact model and revision with the seller before ordering.

Accessories and replacement parts

Prusa’s exact-model support page provides the CORE One L handbook, firmware, PrusaSlicer, sample G-code, community forum and printable-parts resources. Check compatibility against the CORE One L and its revision before buying a sheet, nozzle, upgrade or replacement part; this proposal does not assume CORE One or INDX accessory compatibility.

CORE One L sample G-codes

CORE One L forum

Reviews and guides

Prusa’s product page cites coverage from TechRadar and Tom’s Hardware. Those are third-party publications, not GoodPrints3D hands-on tests. No GoodPrints3D canonical article for this exact model was verified in this research stage.

Prusa CORE One L buyer guide

Prusa CORE One L vs QIDI Plus4 comparison