Phrozen Sonic Mighty Revo 14K 3D Printer Specifications
Phrozen Sonic Mighty Revo 14K
The Sonic Mighty Revo 14K is a resin LCD printer with a 10.1-inch 14K mono LCD (13,320 × 5,120 pixels), a stated 223 × 126 × 235 mm build volume, and USB or Wi-Fi connectivity. Phrozen lists an average speed of 450 layers per hour; this ...
Printer details
Manufacturer: Phrozen. Technology: Resin.
Specifications below are based on the linked sources. Manufacturer claims are not independent test results.
Specifications
- Build width: 223 mm Source
- Build depth: 126 mm Source
- Build height: 235 mm Source
- Machine width: 353 mm Source
- Machine depth: 345 mm Source
- Machine height: 517 mm Source
- Machine weight: 18 kg Source
- Wi-Fi: Yes Source
Specifications may vary by configuration and region. Missing information will be added as it is verified.
Overview
The Sonic Mighty Revo 14K is a resin LCD printer with a 10.1-inch 14K mono LCD (13,320 × 5,120 pixels), a stated 223 × 126 × 235 mm build volume, and USB or Wi-Fi connectivity. Phrozen lists an average speed of 450 layers per hour; this is a manufacturer figure, not an independently measured result.
A good fit for
- Small and medium resin prints, based on Phrozen's stated intended use.
Keep in mind
- Resin printing requires post-processing and suitable resin handling; check the manual and resin safety documentation.
- The official listing currently marks the printer unavailable.
Buying advice
Phrozen's official product listing is the exact-model buying route, but it currently marks the printer unavailable. No currently available purchase route was verified in this research pass.
Accessories and replacement parts
Phrozen's support center has model-specific unboxing, setup, calibration, troubleshooting, and component replacement instructions. Its parts collection lists several items named for Sonic Mighty Revo; check each component's exact compatibility before ordering.
Reviews and guides
No independently verified hands-on review was established for this packet. This section can be updated when an exact-model review has been checked and its canonical article URL is available.