Phrozen Shuffle 4K 3D Printer Specifications

Printer hub

Phrozen Shuffle 4K

Phrozen documents the Shuffle 4K in its resin-printer slicer setup guide with a 68.04 × 120.96 × 170 mm build volume. Its setup table lists a 2160 × 3840 pixel grid and Normal mirror setting.

Printer details

Manufacturer: Phrozen. Technology: Resin.

Specifications below are based on the linked sources. Manufacturer claims are not independent test results.

Specifications

  • Build volume: Standard build area: Phrozen Shuffle 4K: 68.04 × 120.96 × 170 mm Source
  • Build width: 68.04 mm Source
  • Build depth: 120.96 mm Source
  • Build height: 170 mm Source

Specifications may vary by configuration and region. Missing information will be added as it is verified.

Compare 3D printers

Overview

Phrozen documents the Shuffle 4K in its resin-printer slicer setup guide with a 68.04 × 120.96 × 170 mm build volume. Its setup table lists a 2160 × 3840 pixel grid and Normal mirror setting.

A good fit for

  • Resin printing within the documented 68.04 × 120.96 × 170 mm build volume.

Keep in mind

  • The manufacturer setup table identifies slicer dimensions and pixel grid, not measured print accuracy or performance.

Buying advice

No current exact-model purchase offer was verified for this proposal. Check Phrozen's official reseller directory for current availability.

Find an authorized Phrozen reseller

Accessories and replacement parts

For slicer setup, Phrozen lists the Shuffle 4K dimensions, resolution and Normal mirror setting. The guide explains how to enter machine data in CHITUBOX when a resin printer is not listed.

Phrozen slicer setup and printer data

Reviews and guides

No verified Shuffle 4K review or guide article was identified in this research pass.